-- *******************************************************************
-- CISCO-LWAPP-DOT11-CLIENT-MIB.my: Dot11 Wireless Clients MIB
--   
-- June 2006, Devesh Pujari, Srinath Candadai
-- March 2011 Suja Thangaveluchamy
--   
-- Copyright (c) 2006, 2010-2012, 2016-2018 by Cisco Systems Inc.
-- All rights reserved.
-- *******************************************************************

CISCO-LWAPP-DOT11-CLIENT-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    NOTIFICATION-TYPE,
    Unsigned32,
    Counter64,
    IpAddress,
    Integer32,
    Counter32,
    TimeTicks
        FROM SNMPv2-SMI
    MODULE-COMPLIANCE,
    OBJECT-GROUP,
    NOTIFICATION-GROUP
        FROM SNMPv2-CONF
    TruthValue,
    MacAddress,
    TimeInterval,
    TimeStamp,
    RowStatus
        FROM SNMPv2-TC
    SnmpAdminString
        FROM SNMP-FRAMEWORK-MIB
    InetAddressType,
    InetAddress
        FROM INET-ADDRESS-MIB
    VlanId
        FROM Q-BRIDGE-MIB
    cLApDot11IfSlotId,
    cLApName,
    cLApLocation,
    cLApIfLoadChannelUtilization,
    cLApDot11RadioChannelNumber,
    cLAPGroupVlanName,
    cLApSubMode
        FROM CISCO-LWAPP-AP-MIB
    CLApIfType,
    CLDot11ClientStatus,
    CLClientPowerSaveMode,
    CcxServiceVersion
        FROM CISCO-LWAPP-TC-MIB
    CiscoURLStringOrEmpty
        FROM CISCO-TC
    cLMobilityExtMCClientAnchorMCPrivateAddress,
    cLMobilityExtMCClientAnchorMCPrivateAddressType,
    cLMobilityExtMCClientAssociatedMAAddress,
    cLMobilityExtMCClientAssociatedMAAddressType,
    cLMobilityExtMCClientAssociatedMCAddress,
    cLMobilityExtMCClientAssociatedMCAddressType,
    cLMobilityExtMCClientAssociatedMCGroupId,
    cLMobilityExtMCClientAnchorMCGroupId
        FROM CISCO-LWAPP-MOBILITY-EXT-MIB
    ciscoMgmt
        FROM CISCO-SMI;


-- ********************************************************************
-- *  MODULE IDENTITY
-- ********************************************************************

ciscoLwappDot11ClientMIB MODULE-IDENTITY
    LAST-UPDATED    "201804230000Z"
    ORGANIZATION    "Cisco Systems Inc."
    CONTACT-INFO
            "Cisco Systems,
            Customer Service
            Postal: 170 West Tasman Drive
            San Jose, CA  95134
            USA
            Tel: +1 800 553-NETS

            Email: cs-wnbu-snmp@cisco.com"
    DESCRIPTION
        "This MIB is intended to be implemented on all those
        devices operating as Central controllers, that
        terminate the Light Weight Access Point Protocol
        tunnel from Cisco Light-weight LWAPP Access Points.

        Information provided by this MIB is about the
        configuration and monitoring of 802.11 wireless
        clients in the network.

        The relationship between CC and the LWAPP APs
        can be depicted as follows:

        +......+     +......+     +......+           +......+
        +      +     +      +     +      +           +      +
        +  CC  +     +  CC  +     +  CC  +           +  CC  +
        +      +     +      +     +      +           +      +
        +......+     +......+     +......+           +......+
        ..            .             .                 .
        ..            .             .                 .
        .  .            .             .                 .
        .    .            .             .                 .
        .      .            .             .                 .
        .        .            .             .                 .
        +......+ +......+     +......+      +......+          +......+
        +      + +      +     +      +      +      +          +      +
        +  AP  + +  AP  +     +  AP  +      +  AP  +          +  AP  +
        +      + +      +     +      +      +      +          +      +
        +......+ +......+     +......+      +......+          +......+
        .              .             .                 .
        .  .              .             .                 .
        .    .              .             .                 .
        .      .              .             .                 .
        .        .              .             .                 .
        +......+ +......+     +......+      +......+          +......+
        +      + +      +     +      +      +      +          +      +
        +  MN  + +  MN  +     +  MN  +      +  MN  +          +  MN  +
        +      + +      +     +      +      +      +          +      +
        +......+ +......+     +......+      +......+          +......+

        The LWAPP tunnel exists between the controller and
        the APs.  The MNs communicate with the APs through
        the protocol defined by the 802.11 standard.

        LWAPP APs, upon bootup, discover and join one of the
        controllers and the controller pushes the configuration,
        that includes the WLAN parameters, to the LWAPP APs.
        The APs then encapsulate all the 802.11 frames from
        wireless clients inside LWAPP frames and forward
        the LWAPP frames to the controller.

                           GLOSSARY

        Access Point ( AP )

        An entity that contains an 802.11 medium access
        control ( MAC ) and physical layer ( PHY ) interface
        and provides access to the distribution services via
        the wireless medium for associated clients.  

        LWAPP APs encapsulate all the 802.11 frames in
        LWAPP frames and sends them to the controller to which
        it is logically connected.

        Basic Service Set ( BSS ) 

        Coverage area of one access point is called a BSS. An 
        access point (AP) acts as a master to control the 
        clients within that BSS. 

        Clear To Send (CTS)

        Refer to the description of RTS.                

        Light Weight Access Point Protocol ( LWAPP ) 

        This is a generic protocol that defines the 
        communication between the Access Points and the
        Central Controller.


        MAC Service Data Units ( MSDU )

        The MSDU is that unit of data received from 
        the logical link control ( LLC ) sub-layer which lies
        above the medium access control ( MAC ) sub-layer in a
        protocol stack. 

        Message Integrity Code ( MIC )

        A value generated by a symmetric key cryptographic 
        function. If the input data are changed, a new value 
        cannot be correctly computed without knowledge of the
        symmetric key. Thus, the secret key protects the input 
        data from undetectable alteration.

        Mobile Node ( MN )

        A roaming 802.11 wireless device in a wireless
        network associated with an access point. Mobile Node,
        Mobile Station(Ms) and client are used 
        interchangeably. 

        Request To Send ( RTS )

        A client wishing to send data initiates the process by
        sending a Request To Send (RTS) frame. The destination
        client replies with a Clear To Send (CTS) frame.

        Wireless local-area network ( WLAN )
        A local-area network that uses high-frequency radio 
        waves rather than wires to communicate between nodes.

        Service Set Identifier (SSID)
        A service set identifier is a name that identifies a 
        particular 802.11 wireless LAN. A client device 
        receives broadcast messages from all access points 
        within range advertising their SSIDs. The client 
        device can then either manually or automatically 
        based on configuration select the network with which
        to associate. The SSID can be up to 32 characters long.

        Hybrid Remote Edge Access Point (HREAP)
        HREAP is a wireless solution for branch office and 
        remote office deployments. It enables customers to
        configure and control access points in a branch or
        remote office from the corporate office through a 
        wide area network (WAN) link without deploying a 
        controller in each office. HREAP is also known as 
        flexconnect.

        Workgroup Bridge ( WGB )
        A WGB can provide a wireless infrastructure connection
        for a Ethernet-enabled devices. Devices that do not 
        have a wireless client adapter in order to connect to
        the wireless network can be connected to a WGB through            
        Ethernet port.

        KTS (Key Telephone System)

        Key Telephone System is an alternative to a private 
        branch exchange (PBX) phone system. A KTS is equipped
        with several buttons that allow a caller to directly 
        select outgoing lines or incoming calls, and use 
        intercom and conference facilities. 

        REFERENCE

        [1] Wireless LAN Medium Access Control ( MAC ) and
        Physical Layer ( PHY ) Specifications 

        [2] Draft-obara-capwap-lwapp-00.txt, IETF Light 
        Weight Access Point Protocol"
    REVISION        "201804230000Z"
    DESCRIPTION
        "Added cldcClientiPSKTag."
    REVISION        "201712200000Z"
    DESCRIPTION
        "Added cldcClientCurrentTxRate."
    REVISION        "201704190000Z"
    DESCRIPTION
        "Added the following objects cldcClientDataSwitching,
        cldcClientAuthentication, cldcClientAuthMode, 
        cldcClientSessionID, cldcClientMdnsProfile, 
        cldcClientPolicyName, cldcUserAuthType, 
        cldcClientMaxDataRate, and cldcClientVhtCapable."
    REVISION        "201104290000Z"
    DESCRIPTION
        "Added ciscoLwappDot11ClientMIBStatusGroupRev2,
        ciscoLwappDot11ClientMIBNotifsGroupRev2, 
        and ciscoLwappDot11ClientMIBNotifControlGroup.
        Deprecated ciscoLwappDot11ClientMIBCompliance and 
        added ciscoLwappDot11ClientMIBComplianceRev2"
    REVISION        "200611210000Z"
    DESCRIPTION
        "Initial version of this MIB module."
    ::= { ciscoMgmt 599 }


ciscoLwappDot11ClientMIBNotifs  OBJECT IDENTIFIER
    ::= { ciscoLwappDot11ClientMIB 0 }

ciscoLwappDot11ClientMIBObjects  OBJECT IDENTIFIER
    ::= { ciscoLwappDot11ClientMIB 1 }

ciscoLwappDot11ClientMIBConform  OBJECT IDENTIFIER
    ::= { ciscoLwappDot11ClientMIB 2 }

ciscoLwappDot11ClientCcxMIBObjects  OBJECT IDENTIFIER
    ::= { ciscoLwappDot11ClientMIB 3 }

cldcConfigObjects  OBJECT IDENTIFIER
    ::= { ciscoLwappDot11ClientMIBObjects 1 }

cldcNotifObjects  OBJECT IDENTIFIER
    ::= { ciscoLwappDot11ClientMIBObjects 2 }

cldcStatusObjects  OBJECT IDENTIFIER
    ::= { ciscoLwappDot11ClientMIBObjects 3 }

cldcStatisticObjects  OBJECT IDENTIFIER
    ::= { ciscoLwappDot11ClientMIBObjects 4 }

cldcCcxObjects  OBJECT IDENTIFIER
    ::= { ciscoLwappDot11ClientCcxMIBObjects 1 }

-- ********************************************************************
-- Wireless Clients
-- ********************************************************************

cldcClientTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CldcClientEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table represents the 802.11 wireless clients
        that are associated with the APs that have joined 
        this controller.
        An entry is created automatically by the controller 
        when the client gets associated to the AP. An existing
        entry gets deleted when the association gets dropped.
        Each client added to this table is uniquely identified
        by the client's MAC address."
    ::= { cldcStatusObjects 1 }

cldcClientEntry OBJECT-TYPE
    SYNTAX          CldcClientEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each entry represents a conceptual row in this
        table and provides the information about the
        clients associated to the APs that have joined 
        the controller. An entry is identified the client's
        MAC address."
    INDEX           { cldcClientMacAddress } 
    ::= { cldcClientTable 1 }

CldcClientEntry ::= SEQUENCE {
        cldcClientMacAddress            MacAddress,
        cldcClientStatus                CLDot11ClientStatus,
        cldcClientWlanProfileName       SnmpAdminString,
        cldcClientWgbStatus             INTEGER,
        cldcClientWgbMacAddress         MacAddress,
        cldcClientProtocol              INTEGER,
        cldcAssociationMode             INTEGER,
        cldcApMacAddress                MacAddress,
        cldcIfType                      CLApIfType,
        cldcClientIPAddress             IpAddress,
        cldcClientNacState              INTEGER,
        cldcClientQuarantineVLAN        VlanId,
        cldcClientAccessVLAN            VlanId,
        cldcClientLoginTime             TimeStamp,
        cldcClientUpTime                TimeInterval,
        cldcClientPowerSaveMode         CLClientPowerSaveMode,
        cldcClientCurrentTxRateSet      OCTET STRING,
        cldcClientDataRateSet           OCTET STRING,
        cldcClientHreapApAuth           INTEGER,
        cldcClient80211uCapable         TruthValue,
        cldcClientPostureState          TruthValue,
        cldcClientAclName               SnmpAdminString,
        cldcClientAclApplied            INTEGER,
        cldcClientRedirectUrl           CiscoURLStringOrEmpty,
        cldcClientAaaOverrideAclName    SnmpAdminString,
        cldcClientAaaOverrideAclApplied INTEGER,
        cldcClientUsername              SnmpAdminString,
        cldcClientSSID                  SnmpAdminString,
        cldcClientSecurityTagId         Unsigned32,
        cldcClientTypeKTS               TruthValue,
        cldcClientIpv6AclName           SnmpAdminString,
        cldcClientIpv6AclApplied        INTEGER,
        cldcClientDataSwitching         INTEGER,
        cldcClientAuthentication        INTEGER,
        cldcClientChannel               Unsigned32,
        cldcClientAuthMode              INTEGER,
        cldcClientReasonCode            INTEGER,
        cldcClientSessionID             SnmpAdminString,
        cldcClientApRoamMacAddress      MacAddress,
        cldcClientMdnsProfile           SnmpAdminString,
        cldcClientMdnsAdvCount          Unsigned32,
        cldcClientPolicyName            SnmpAdminString,
        cldcClientAAARole               SnmpAdminString,
        cldcClientDeviceType            SnmpAdminString,
        cldcUserAuthType                INTEGER,
        cldcClientTunnelType            INTEGER,
        cldcClientMaxDataRate           Unsigned32,
        cldcClientHtCapable             TruthValue,
        cldcClientVhtCapable            TruthValue,
        cldcClientCurrentTxRate         Unsigned32,
        cldcClientiPSKTag               OCTET STRING
}

cldcClientMacAddress OBJECT-TYPE
    SYNTAX          MacAddress
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object represents the MAC address of the
        client for this entry  and uniquely identifies 
        this entry." 
    ::= { cldcClientEntry 1 }

cldcClientStatus OBJECT-TYPE
    SYNTAX          CLDot11ClientStatus
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the current status of
        the client." 
    ::= { cldcClientEntry 2 }

cldcClientWlanProfileName OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (0..32))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the WLAN profile name
        this 802.11 wireless client is connected to." 
    ::= { cldcClientEntry 3 }

cldcClientWgbStatus OBJECT-TYPE
    SYNTAX          INTEGER  {
                        regClient(1),
                        wgbClient(2),
                        wgb(3)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the work group bridging
        status of a DOT11 client.
        A value of 'regClient' represents that the client is 
        a wireless client
        A value of 'wgbClient' represents that the client is 
        connected via a WGB
        A value of 'wgb' represents that the client is the 
        WGB itself." 
    ::= { cldcClientEntry 4 }

cldcClientWgbMacAddress OBJECT-TYPE
    SYNTAX          MacAddress
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the MAC address of the
        WGB this 802.11 wireless client to which it is 
        connected.  This returns a non-zero value when 
        the cldcClientWgbStatus is wgbClient." 
    ::= { cldcClientEntry 5 }

cldcClientProtocol OBJECT-TYPE
    SYNTAX          INTEGER  {
                        dot11a(1),
                        dot11b(2),
                        dot11g(3),
                        unknown(4),
                        mobile(5),
                        dot11n24(6),
                        dot11n5(7),
                        ethernet(8),
                        dot3(9),
                        dot11ac5(10)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents 802.11 protocol type of the
        client it used to join to wireless network.
        A value of 'dot11a' represents that the client is using
        802.11a standard  to connect to the access point (AP)
        A value of 'dot11b' represents that the client is using 
        802.11b standard to connect to the access point (AP)
        A value of 'dot11g' represents that the client is using 
        802.11g standard to connect to the access point (AP)
        A value of 'unknown' represents that the client protocol
        is unknown
        A value of 'mobile' represents that the client using mobile
        wireless to connect to the access point (AP).
        A value of 'dot11n24' represents that the client is using 
        802.11n standard with 2.4 GHz frequency to connect to 
        the access point (AP)
        A value of 'dot11n5' represents that the client is using 
        802.11n standard with 5 GHz frequency to connect to 
        the access point (AP).
        A value of 'ethernet' represents that the client is using 
        ethernet standard to connect to the access point (AP).
        A value of 'dot3' represents that the client is using 
        dot3 standard to connect to the access point (AP).
        A value of 'dot11ac5' represents that the client is using 
        802.11ac standard with 5 GHz frequency to connect to
        the access point (AP)." 
    ::= { cldcClientEntry 6 }

cldcAssociationMode OBJECT-TYPE
    SYNTAX          INTEGER  {
                        unknown(1),
                        wep(2),
                        wpa(3),
                        wpa2(4)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the association mode used
        by client for protected wireless traffic.

        A value of 'unknown' represents that association mode used 
        by client for wilress traffic encryption is not known.
        A value of 'wep' represents that association mode used 
        by client for wilress traffic encryption is WEP.
        A value of 'wpa' represents that association mode used 
        by client for wilress traffic encryption is WPA.
        A value of 'wpa2' represents that association mode used 
        by client for wilress traffic encryption is WPA2." 
    ::= { cldcClientEntry 7 }

cldcApMacAddress OBJECT-TYPE
    SYNTAX          MacAddress
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the radio MAC address
        of a LWAPP AP." 
    ::= { cldcClientEntry 8 }

cldcIfType OBJECT-TYPE
    SYNTAX          CLApIfType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the wireless interface type." 
    ::= { cldcClientEntry 9 }

cldcClientIPAddress OBJECT-TYPE
    SYNTAX          IpAddress
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents client's IP address.
        This is learnt from the client details when the client 
        associates with the access point." 
    ::= { cldcClientEntry 10 }

cldcClientNacState OBJECT-TYPE
    SYNTAX          INTEGER  {
                        quarantine(1),
                        access(2)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies that client's network admission
        control state.

        A value of 'quarantine' specifies that client goes through
        posture analysis and the client traffic is sent by 
        controller in quarantine vlan.

        A value of 'access' specifies that client traffic is sent
        by controller in access vlan. The client should have 
        completed posture analysis. 

           Posture Analysis is a state change where the client 
        applies the configured policies to validate access 
        to the network." 
    ::= { cldcClientEntry 11 }

cldcClientQuarantineVLAN OBJECT-TYPE
    SYNTAX          VlanId
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the quarantine VLAN for client. The
        quarantine VLAN only allows limited access to the network." 
    ::= { cldcClientEntry 12 }

cldcClientAccessVLAN OBJECT-TYPE
    SYNTAX          VlanId
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the access VLAN for client.
        The access VLAN allows unlimited access to the network." 
    ::= { cldcClientEntry 13 }

cldcClientLoginTime OBJECT-TYPE
    SYNTAX          TimeStamp
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the value of sysUpTime when the
        client logged in." 
    ::= { cldcClientEntry 14 }

cldcClientUpTime OBJECT-TYPE
    SYNTAX          TimeInterval
    UNITS           "Seconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the duration for which the client
        has been associated with this device." 
    ::= { cldcClientEntry 15 }

cldcClientPowerSaveMode OBJECT-TYPE
    SYNTAX          CLClientPowerSaveMode
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the power management mode of
        the client." 
    ::= { cldcClientEntry 16 }

cldcClientCurrentTxRateSet OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (2))
    UNITS           "Mbit/s"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the current data rate at which the
        client transmits and receives data. The data rate field is
        a 16-bit unsigned value expressing the data rate of the 
        packets received by the client."
    REFERENCE       "RFC 5416" 
    ::= { cldcClientEntry 17 }

cldcClientDataRateSet OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (1..126))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the set of data rates at which the
        client may transmit data. Each client can support up to 
        126 rates. Each octet contains an integer value 
        representing one of these 126 rates ranging from 1 Mb/s 
        to 63.5 Mb/s. One of the supported rates will be chosen 
        by the access point for transmission with the client."
    REFERENCE       "RFC 5416" 
    ::= { cldcClientEntry 18 }

cldcClientHreapApAuth OBJECT-TYPE
    SYNTAX          INTEGER  {
                        true(1),
                        false(2),
                        notApplicable(3)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates whether the client is locally
        authenticated or authenticated by the controller.
        Local authentication is done only if the Access Point
        connected to the client is of flexconnect mode.
        A value of 'true' indicates that the client is
        authenticated by the AP..
        A value of 'false' indicates that the client is 
        authenticated by the controller.
        A value of 'notApplicable' indicates that client is not
        connected to a flexconect AP." 
    ::= { cldcClientEntry 19 }

cldcClient80211uCapable OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates whether the client supports
        802.11u feature.
        The 802.11u standard allows devices such as laptop 
        computers or cellular phones to join a wireless LAN 
        widely used in the home, office and some commercial 
        establishments.
        A value of 'true' indicates that the client supports the 
        802.11u feature.
        A value of 'false' indicates that the client does not 
        support the 802.11u feature."
    REFERENCE       "IEEE 802.11u" 
    ::= { cldcClientEntry 20 }

cldcClientPostureState OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the posture state of the client.
        Posture Analysis is a state change where the client applies  
        the configured policies to validate access to the network.
        A value of 'true' indicates that the client supports the 
        posture feature.
        A value of 'false' indicates that the client does not support 
        the posture feature." 
    ::= { cldcClientEntry 21 }

cldcClientAclName OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the ACL Name for the client.
        This ACL will be used to allow or block client traffic
        based on the list of rules attached to the ACL." 
    ::= { cldcClientEntry 22 }

cldcClientAclApplied OBJECT-TYPE
    SYNTAX          INTEGER  {
                        true(1),
                        false(2),
                        notAvailable(3)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the ACL applied status for the
        client. 
         A value of 'true' indicates that the ACL is applied. 
         A value of 'false' indicates that the ACL is not applied. 
         A value of 'notAvailable' indicates that applied status
         is not available" 
    ::= { cldcClientEntry 23 }

cldcClientRedirectUrl OBJECT-TYPE
    SYNTAX          CiscoURLStringOrEmpty
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the AAA override redirect URL for a
        client with cldcClientPostureState enabled.
        The object has a valid value when the WLAN, with which the 
        client has associated requires conditional or splash-page 
            or webauth web redirection. 
        This object is otherwise not applicable, 
            and contains a zero-length string." 
    ::= { cldcClientEntry 24 }

cldcClientAaaOverrideAclName OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the AAA Override ACL Name for the
        client if cldcClientPostureState is enabled on the wlan." 
    ::= { cldcClientEntry 25 }

cldcClientAaaOverrideAclApplied OBJECT-TYPE
    SYNTAX          INTEGER  {
                        true(1),
                        false(2),
                        notAvailable(3)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the AAA Override ACL applied status for
        the client if cldcClientPostureState is enabled on the wlan.
        A value of 'true' indicates that the ACL is applied.
        A value of 'false' indicates that the ACL is not applied.
        A value of 'notAvailable' indicates that applied status is
        not available" 
    ::= { cldcClientEntry 26 }

cldcClientUsername OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (0..32))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the username used by the client." 
    ::= { cldcClientEntry 27 }

cldcClientSSID OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (0..32))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the SSID of the WLAN to which the
        client is associated." 
    ::= { cldcClientEntry 28 }

cldcClientSecurityTagId OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the security group tag of the client." 
    ::= { cldcClientEntry 29 }

cldcClientTypeKTS OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates whether the client is NEC KTS (National
        Electrical Code Key Telephone servie) client or not.
        A value of 'true' indicates that the client follows NEC 
        KTS SIP protocol.
        A value of 'false' indicates that the client does not follow 
        NEC KTS SIP protocol." 
    ::= { cldcClientEntry 30 }

cldcClientIpv6AclName OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the ACL name for the IPv6 client.
        An empty string denotes no ACL has been applied." 
    ::= { cldcClientEntry 31 }

cldcClientIpv6AclApplied OBJECT-TYPE
    SYNTAX          INTEGER  {
                        true(1),
                        false(2),
                        notAvailable(3)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the ACL applied status for the IPv6
        client.
        A value of 'true' indicates that the ACL is applied.
        A value of 'false' indicates that the ACL is not applied.
        A value of 'notAvailable' indicates that applied status is
        not avaliable" 
    ::= { cldcClientEntry 32 }

cldcClientDataSwitching OBJECT-TYPE
    SYNTAX          INTEGER  {
                        unknown(1),
                        central(2),
                        local(3)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates whether client is switching data
        locally or centrally. This object is valid for flexconnect 
        APs.
        A value of 'unknown' indicates that client data switching is 
        not known.
        A value of 'central' indicates that client data is tunneled 
        to WLC using CAPWAP.
        A value of 'local' indicates that client data is bridged 
        locally by AP." 
    ::= { cldcClientEntry 33 }

cldcClientAuthentication OBJECT-TYPE
    SYNTAX          INTEGER  {
                        unknown(1),
                        central(2),
                        local(3)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates whether client is authentiated
        locally or centrally. This object is valid for flexconnect
        APs.
        A value of 'unknown' indicates that client authentication is 
        not known.
        A value of 'central' indicates that client authenticatation is 
        at WLC and AP tunnels client management traffic to WLC
        via CAPWAP.
        A value of 'local' indicates that client is authenticated 
        locally by AP." 
    ::= { cldcClientEntry 34 }

cldcClientChannel OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the access point's channel
        to which the client is associated." 
    ::= { cldcClientEntry 35 }

cldcClientAuthMode OBJECT-TYPE
    SYNTAX          INTEGER  {
                        none(0),
                        psk(1),
                        radius(2),
                        cckm(3),
                        wapipsk(4),
                        wapicert(5),
                        ftDot1x(6),
                        ftPsk(7),
                        pmfDot1x(8),
                        pmfPsk(9)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the authentication mode of client.
        A value of 'none' represents that client used 
        open authentication to join to network.
        A value of 'psk' represents that client used 
        PSK based authentication to join to network.
        A value of 'radius' represents that client gets 
        authenticated with the help of radius.
        A value of 'cckm' represents that client used 
        CCKM based authentication to join to network.
        A value of 'wapipsk' represents that client used 
        WAPI PSK authentication to join to network.
        A value of 'wapicert' represents that client used 
        WPA/WPA2 DOT1X authentication to join to network.
        A value of 'ftDot1x' represents that client used 
        802.11r DOT1X authentication to join to network.
        A value of 'ftpsk' represents that client used 
        802.11r PSK authentication to join to network.
        A value of 'pmfDot1x' represents that client used 
        PMF DOT1X authentication to join to network.
        A value of 'pmfpsk' represents that client used 
        PMF PSK authentication to join to network." 
    ::= { cldcClientEntry 36 }

cldcClientReasonCode OBJECT-TYPE
    SYNTAX          INTEGER  {
                        unspecified(1),
                        previousAuthNotValid(2),
                        deauthenticationLeaving(3),
                        disassociationDueToInactivity(4),
                        disassociationAPBusy(5),
                        class2FrameFromNonAuthStation(6),
                        class2FrameFromNonAssStation(7),
                        disassociationStaHasLeft(8),
                        staReqAssociationWithoutAuth(9),
                        invalidInformationElement(40),
                        groupCipherInvalid(41),
                        unicastCipherInvalid(42),
                        akmpInvalid(43),
                        unsupportedRsnVersion(44),
                        invalidRsnIeCapabilities(45),
                        cipherSuiteRejected(46),
                        missingReasonCode(99),
                        maxAssociatedClientsReached(101),
                        maxAssociatedClientsReachedOnRadio(105),
                        maxAssociatedClientsReachedOnWlan(106),
                        unSpecifiedQosFailure(200),
                        qosPolicyMismatch(201),
                        inSufficientBandwidth(202),
                        inValidQosParams(203)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the reason for disassociation
        of client.
        A value of 'unspecified' represents that client disassociated
        with reaon unspecified.
        A value of 'previousAuthNotValid' represents that client 
        disassociated with reason previous authentication 
        was not valid.
        A value of 'deauthenticationLeaving' represents that client 
        disassociated with reason client leaving due to 
        deauthentication.
        A value of 'disassociationDueToInactivity' represents that client 
        disassociated with reason client disassociation due to
        inactivity.
        A value of 'disassociationAPBusy' represents that client 
        disassociated with reason client disassociation since AP 
        was busy.
        A value of 'class2FrameFromNonAuthStation' represents that client 
        disassociated with reason class 2 frame 
        from non authenticated station.
        A value of 'class2FrameFromNonAssStation' represents that client 
        disassociated with reason class 2 frame from non 
        associated station.
        A value of 'disassociationStaHasLeft' represents that client 
        disassociated with reason station has left BSS due 
        to disassociation.
        A value of 'staReqAssociationWithoutAuth' represents that client 
        disassociated with reason station send association request
        without authentication.
        A value of 'invalidInformationElement' represents that client 
        disassociated with reason stations send invalid information 
        element in the management frame.
        A value of 'groupCipherInvalid' represents that client 
        disassociated with reason invalid group cipher.
        A value of 'unicastCipherInvalid' represents that client 
        disassociated with reason invalid unicast cipher.
        A value of 'akmpInvalid' represents that client 
        disassociated with reason invalid key management protocol.
        A value of 'unsupportedRsnVersion' represents that client 
        disassociated with reason unsupported RSN version.
        A value of 'invalidRsnIeCapabilities' represents that client 
        disassociated with reason invalid RSN IE capabilities
        in the (re-)association request.
        A value of 'cipherSuiteRejected' represents that client 
        disassociated with reason cipher suite rejected.
        A value of 'missingReasonCode' represents that client 
        disassociated with reason reason code is missing.
        A value of 'maxAssociatedClientsReached' represents that  
        client disassociated with reason maximum allowed 
        associated client number has reached.
        A value of 'maxAssociatedClientsReachedOnRadio' represents that 
        client disassociated with reason maximum allowed 
        associated client number has reached on radio.
        A value of 'maxAssociatedClientsReachedOnWlan' represents that
        client disassociated with reason maximum allowed 
        associated client number has reached on wlan.
        A value of 'unSpecifiedQosFailure' represents that client 
        disassociated with reason unsupported QOS failure.
        A value of 'qosPolicyMismatch' represents that client 
        disassociated with reason mismatch on QOS policy.
        A value of 'inSufficientBandwidth' represents that client 
        disassociated with reason insufficient bandwidth to
        accommodate this station.
        A value of 'inValidQosParams' represents that client 
        disassociated with reason invalid QOS parameters." 
    ::= { cldcClientEntry 37 }

cldcClientSessionID OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the session
        to which the client is associated." 
    ::= { cldcClientEntry 38 }

cldcClientApRoamMacAddress OBJECT-TYPE
    SYNTAX          MacAddress
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the MAC address of the
        AP to which the client has roamed." 
    ::= { cldcClientEntry 39 }

cldcClientMdnsProfile OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the mDNS profile name
        mapped to 802.11 wireless client. It could
        be mapped to the WLAN to which the client is 
        connected to, or the interface/interface groups
        mapped to the WLAN." 
    ::= { cldcClientEntry 40 }

cldcClientMdnsAdvCount OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of mDNS
        advertisements received on the client." 
    ::= { cldcClientEntry 41 }

cldcClientPolicyName OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the local classification
        policy applied on the client." 
    ::= { cldcClientEntry 42 }

cldcClientAAARole OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the role string of the client
        that is used as match criterion for local policy 
            profiling. This value is provided by radius during 
            authentication." 
    ::= { cldcClientEntry 43 }

cldcClientDeviceType OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the device type of the client.
        This is identified once the profiling operation is 
        completed." 
    ::= { cldcClientEntry 44 }

cldcUserAuthType OBJECT-TYPE
    SYNTAX          INTEGER  {
                        open(1),
                        wepPsk(2),
                        portal(3),
                        simPeap(4),
                        other(5)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the authentication aype of user.
        A value of 'open' indicates that the user authenticated using
        open security.
        A value of 'wepPsk' indicates that the user authenticated using
        WEP PSK security.
        A value of 'portal' indicates that the user authenticated using
        WEB layer3 portal security.
        A value of 'simPeap' indicates that the user authenticated using
        EAP SIM and PEAP security.
        A value of 'other' indicates that the user authenticated using
        security method not listed above." 
    ::= { cldcClientEntry 45 }

cldcClientTunnelType OBJECT-TYPE
    SYNTAX          INTEGER  {
                        simple(1),
                        pmipv6(2),
                        gtpv2(3),
                        eogre(4)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the tunnel type used to send
        client traffic.
        A value of 'simple' indicates no tunnel is used to send
        client traffic towards DS.
        A value of 'pmipv6' indicates that PMIPv6 tunnel is used 
        to send client traffic towards DS.
        A value of 'gtpv2' indicates that GTPv2 tunnel is used 
        to send client traffic towards DS.
        A value of 'eogre' indicates that EOGRE tunnel is used 
        to send client traffic towards DS." 
    ::= { cldcClientEntry 46 }

cldcClientMaxDataRate OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the max data rate (Mbps)
        with which the client can operate." 
    ::= { cldcClientEntry 47 }

cldcClientHtCapable OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates whether the client is HT
        (high throughput) capable or not.
         A value of 'true' indicates that client is HT capable.
         A value of 'false' indicates that client is not HT capable." 
    ::= { cldcClientEntry 48 }

cldcClientVhtCapable OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates whether the client is VHT
        (very high throughput) capable or not.
         A value of 'true' indicates that client is VHT capable.
         A value of 'false' indicates that client is not VHT capable." 
    ::= { cldcClientEntry 49 }

cldcClientCurrentTxRate OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "Mbit/s"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the current data rate at which the
        client transmits and receives data. This provides the data
        rate value equivalent to the MCS value displayed in
        cldcClientCurrentTxRateSet."
    REFERENCE       "RFC 5416" 
    ::= { cldcClientEntry 50 }

cldcClientiPSKTag OBJECT-TYPE
    SYNTAX          OCTET STRING
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the iPSK peer group that this client is part of.
        The clients with same ipsk tag can be allowed to have peer to peer traffic by
        configuring the wlan p2p blocking." 
    ::= { cldcClientEntry 51 }
 


cldcClientByIpTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CldcClientByIpEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table represents the 802.11 wireless clients
        that are associated with the APs that have joined
        this controller and are indexed by 
        cldcClientByIpAddressType and cldcClientByIpAddress.
        An entry is created automatically by the controller
        when the client gets associated to the AP. An existing
        entry gets deleted when the association gets dropped."
    ::= { cldcStatusObjects 2 }

cldcClientByIpEntry OBJECT-TYPE
    SYNTAX          CldcClientByIpEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each entry represents a conceptual row in this
        table and provides the information about the
        clients associated to the APs that have joined
        the controller. An entry is identified by the client's
        IP address."
    INDEX           {
                        cldcClientMacAddress,
                        cldcClientByIpAddressType,
                        cldcClientByIpAddress
                    } 
    ::= { cldcClientByIpTable 1 }

CldcClientByIpEntry ::= SEQUENCE {
        cldcClientByIpAddressType         InetAddressType,
        cldcClientByIpAddress             InetAddress,
        cldcClientByIpAddressDiscoverType INTEGER,
        cldcClientByIpAddressLastSeen     TimeStamp
}

cldcClientByIpAddressType OBJECT-TYPE
    SYNTAX          InetAddressType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object represents the type of the Client's
        address made available through
        cldcClientByIpAddress." 
    ::= { cldcClientByIpEntry 2 }

cldcClientByIpAddress OBJECT-TYPE
    SYNTAX          InetAddress
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object indicates the client IP address." 
    ::= { cldcClientByIpEntry 3 }

cldcClientByIpAddressDiscoverType OBJECT-TYPE
    SYNTAX          INTEGER  {
                        invalid(1),
                        ndp(2),
                        dhcp(3),
                        packet(4),
                        local(5),
                        static(6)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the discovery type of the
        client's address
        A value of 'invalid' indicates that the IP address 
        discover type is unknown.
        A value of 'ndp' indicates that the client learnt 
        IP address by neighbor discovery protocol
        A value of 'dhcp' indicates that the client learnt 
        IP address via DHCP.
        A value of 'packet' indicates that the client learnt 
        IP address via data packet addressing learning.
        A value of 'local' indicates that the client learnt 
        IP address via address applied to local interface.
        A value of 'static' indicates that the client learnt 
        IP address via address assigned statically." 
    ::= { cldcClientByIpEntry 4 }

cldcClientByIpAddressLastSeen OBJECT-TYPE
    SYNTAX          TimeStamp
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the time when an address was
        last seen in reachable state." 
    ::= { cldcClientByIpEntry 5 }
 

-- ********************************************************************
-- *  Sleeping Client Details
-- ********************************************************************

cldcSleepingClientTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CldcSleepingClientEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table represents the information about
        sleeping clients"
    ::= { cldcStatusObjects 3 }

cldcSleepingClientEntry OBJECT-TYPE
    SYNTAX          CldcSleepingClientEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry containing the information about sleeping
        clients."
    INDEX           { cldcSleepingClientMacAddress } 
    ::= { cldcSleepingClientTable 1 }

CldcSleepingClientEntry ::= SEQUENCE {
        cldcSleepingClientMacAddress    MacAddress,
        cldcSleepingClientSsid          OCTET STRING,
        cldcSleepingClientUserName      SnmpAdminString,
        cldcSleepingClientRemainingTime TimeInterval,
        cldcSleepingClientRowStatus     RowStatus
}

cldcSleepingClientMacAddress OBJECT-TYPE
    SYNTAX          MacAddress
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object represents the MAC address of the
        sleeping client and uniquely identifies the entry." 
    ::= { cldcSleepingClientEntry 1 }

cldcSleepingClientSsid OBJECT-TYPE
    SYNTAX          OCTET STRING
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the SSID of the WLAN to which the
        sleeping client is associated." 
    ::= { cldcSleepingClientEntry 2 }

cldcSleepingClientUserName OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the username used by the sleeping
        client." 
    ::= { cldcSleepingClientEntry 3 }

cldcSleepingClientRemainingTime OBJECT-TYPE
    SYNTAX          TimeInterval
    UNITS           "seconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the remaining session time
        for the sleeping client to be in associated state." 
    ::= { cldcSleepingClientEntry 4 }

cldcSleepingClientRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object specifies the status column for this row
        and used to delete specific instances of row in the table." 
    ::= { cldcSleepingClientEntry 5 }
 

-- ********************************************************************
-- *  Wireless client statistics
-- ********************************************************************

cldcClientStatisticTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CldcClientStatisticEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table represents statistics and status of the 802.11
        wireless clients associated to the controller."
    ::= { cldcStatisticObjects 1 }

cldcClientStatisticEntry OBJECT-TYPE
    SYNTAX          CldcClientStatisticEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry in this table represents traffic statistics of the
        associated client."
    INDEX           { cldcClientMacAddress } 
    ::= { cldcClientStatisticTable 1 }

CldcClientStatisticEntry ::= SEQUENCE {
        cldcClientDataRetries              Counter64,
        cldcClientRtsRetries               Counter64,
        cldcClientDuplicatePackets         Counter64,
        cldcClientDecryptFailures          Counter64,
        cldcClientMicErrors                Counter64,
        cldcClientMicMissingFrames         Counter64,
        cldcClientRaPacketsDropped         Counter64,
        cldcClientInterimUpdatesCount      Counter64,
        cldcClientDataBytesReceived        Counter64,
        cldcClientRealtimeBytesReceived    Counter64,
        cldcClientRxDataBytesDropped       Counter64,
        cldcClientRxRealtimeBytesDropped   Counter64,
        cldcClientDataBytesSent            Counter64,
        cldcClientRealtimeBytesSent        Counter64,
        cldcClientTxDataBytesDropped       Counter64,
        cldcClientTxRealtimeBytesDropped   Counter64,
        cldcClientDataPacketsReceived      Counter64,
        cldcClientRealtimePacketsReceived  Counter64,
        cldcClientRxDataPacketsDropped     Counter64,
        cldcClientRxRealtimePacketsDropped Counter64,
        cldcClientDataPacketsSent          Counter64,
        cldcClientRealtimePacketsSent      Counter64,
        cldcClientTxDataPacketsDropped     Counter64,
        cldcClientTxRealtimePacketsDropped Counter64,
        cldcClientTxDataPackets            Counter64,
        cldcClientTxDataBytes              Counter64,
        cldcClientRxDataPackets            Counter64,
        cldcClientRxDataBytes              Counter64
}

cldcClientDataRetries OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Retries"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of attempts made by the
        client before transmitting the MSDU successfully." 
    ::= { cldcClientStatisticEntry 1 }

cldcClientRtsRetries OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Retries"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of times the client has
        attempted to send RTS packets before receiving CTS packets." 
    ::= { cldcClientStatisticEntry 2 }

cldcClientDuplicatePackets OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of times a duplicate
        packet is received for the client." 
    ::= { cldcClientStatisticEntry 3 }

cldcClientDecryptFailures OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of packets received from
        the client that failed to decrypt properly." 
    ::= { cldcClientStatisticEntry 4 }

cldcClientMicErrors OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of MIC errors
        experienced by the client." 
    ::= { cldcClientStatisticEntry 5 }

cldcClientMicMissingFrames OBJECT-TYPE
    SYNTAX          Counter64
    UNITS           "Packets"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of missing MIC packets
        for the client." 
    ::= { cldcClientStatisticEntry 6 }

cldcClientRaPacketsDropped OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of RA (router
        advertisements) packets dropped for this client. 
        It's applicable for IPv6 clients only." 
    ::= { cldcClientStatisticEntry 7 }

cldcClientInterimUpdatesCount OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of interim updates
        sent for this client." 
    ::= { cldcClientStatisticEntry 8 }

cldcClientDataBytesReceived OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of data bytes received
        for this client" 
    ::= { cldcClientStatisticEntry 9 }

cldcClientRealtimeBytesReceived OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of realtime bytes
        received for this mobile station" 
    ::= { cldcClientStatisticEntry 10 }

cldcClientRxDataBytesDropped OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of received data bytes
        dropped for this mobile station" 
    ::= { cldcClientStatisticEntry 11 }

cldcClientRxRealtimeBytesDropped OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of received realtime bytes
        dropped for this mobile station" 
    ::= { cldcClientStatisticEntry 12 }

cldcClientDataBytesSent OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of data bytes sent for
        this mobile station" 
    ::= { cldcClientStatisticEntry 13 }

cldcClientRealtimeBytesSent OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of realtime bytes sent
        for this mobile station" 
    ::= { cldcClientStatisticEntry 14 }

cldcClientTxDataBytesDropped OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of transmitted data
        bytes dropped for this mobile station" 
    ::= { cldcClientStatisticEntry 15 }

cldcClientTxRealtimeBytesDropped OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of transmitted realtime
        bytes dropped for this mobile station" 
    ::= { cldcClientStatisticEntry 16 }

cldcClientDataPacketsReceived OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of data packets
        received for this mobile station" 
    ::= { cldcClientStatisticEntry 17 }

cldcClientRealtimePacketsReceived OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number realtime packets
        received for this mobile station" 
    ::= { cldcClientStatisticEntry 18 }

cldcClientRxDataPacketsDropped OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of received data packets
        dropped for this mobile station" 
    ::= { cldcClientStatisticEntry 19 }

cldcClientRxRealtimePacketsDropped OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of received realtime
        packets dropped for this mobile station" 
    ::= { cldcClientStatisticEntry 20 }

cldcClientDataPacketsSent OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of data packets sent
        for this mobile station" 
    ::= { cldcClientStatisticEntry 21 }

cldcClientRealtimePacketsSent OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of realtime packets
        sent for this mobile station" 
    ::= { cldcClientStatisticEntry 22 }

cldcClientTxDataPacketsDropped OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of transmitted data
        packets dropped for this mobile station" 
    ::= { cldcClientStatisticEntry 23 }

cldcClientTxRealtimePacketsDropped OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of transmitted realtime
        packets dropped for this mobile station" 
    ::= { cldcClientStatisticEntry 24 }

cldcClientTxDataPackets OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of data packets sent
        by this mobile station" 
    ::= { cldcClientStatisticEntry 25 }

cldcClientTxDataBytes OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of data bytes sent
        by this mobile station" 
    ::= { cldcClientStatisticEntry 26 }

cldcClientRxDataPackets OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of data packets sent
        for this mobile station" 
    ::= { cldcClientStatisticEntry 27 }

cldcClientRxDataBytes OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of data bytes sent
        for this mobile station" 
    ::= { cldcClientStatisticEntry 28 }
 

-- ********************************************************************
-- *  Client Ccx Services Version Table
-- ********************************************************************

cldccCcxVersionInfoTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CldccCcxVersionInfoEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table represents the detail of the CCX version
        supported by the clients. This is used to identify 
        the services supported by a CCX v6 client."
    ::= { cldcCcxObjects 1 }

cldccCcxVersionInfoEntry OBJECT-TYPE
    SYNTAX          CldccCcxVersionInfoEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "There is an entry in the table for each entry identified
        by the client mac address.
        An entry is added when a CCX v6 client associates to the 
        controller and existing entry gets deleted when the client 
        disassociates from the controller."
    INDEX           { cldcClientMacAddress } 
    ::= { cldccCcxVersionInfoTable 1 }

CldccCcxVersionInfoEntry ::= SEQUENCE {
        cldccCcxFoundationServiceVersion CcxServiceVersion,
        cldccCcxLocationServiceVersion   CcxServiceVersion,
        cldccCcxVoiceServiceVersion      CcxServiceVersion,
        cldccCcxManagementServiceVersion CcxServiceVersion
}

cldccCcxFoundationServiceVersion OBJECT-TYPE
    SYNTAX          CcxServiceVersion
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the CCX version supported by
        the client for the foundation service." 
    ::= { cldccCcxVersionInfoEntry 1 }

cldccCcxLocationServiceVersion OBJECT-TYPE
    SYNTAX          CcxServiceVersion
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the CCX version supported by
        the client for the location service." 
    ::= { cldccCcxVersionInfoEntry 2 }

cldccCcxVoiceServiceVersion OBJECT-TYPE
    SYNTAX          CcxServiceVersion
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the CCX version supported by
        the client for the voice service." 
    ::= { cldccCcxVersionInfoEntry 3 }

cldccCcxManagementServiceVersion OBJECT-TYPE
    SYNTAX          CcxServiceVersion
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the CCX version supported by
        the client for the management service." 
    ::= { cldccCcxVersionInfoEntry 4 }
 


-- ********************************************************************
-- *    NOTIFICATION  Control objects
-- ********************************************************************

cldcKeyDecryptErrorEnabled OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the status of generation of
        ciscoLwappDot11ClientKeyDecryptError notification.

        A value of 'true' specifies that the agent generates
        ciscoLwappDot11ClientKeyDecryptError notification.

        A value of 'false' specifies that the agent doesn't
        generate ciscoLwappDot11ClientKeyDecryptError notification."
    DEFVAL          { true } 
    ::= { cldcConfigObjects 1 }

cldcAssocNacAlertEnabled OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the status of generation of
        ciscoLwappDot11ClientAssocNacAlert notification.

        A value of 'true' specifies that the agent generates
        ciscoLwappDot11ClientAssocNacAlert notification.

        A value of 'false' specifies that the agent doesn't
        generate ciscoLwappDot11ClientAssocNacAlert notification." 
    ::= { cldcConfigObjects 2 }

cldcDisassocNacAlertEnabled OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the control of generation of
        ciscoLwappDot11ClientDisassocNacAlert notification.

        A value of 'true' specifies that the agent generates
        ciscoLwappDot11ClientDisassocNacAlert notification.

        A value of 'false' specifies that the agent doesn't
        generate ciscoLwappDot11ClientDisassocNacAlert 
        notification." 
    ::= { cldcConfigObjects 3 }

cldcMovedToRunStateEnabled OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the control of generation of
        ciscoLwappDot11ClientMovedToRunState notification.

        A value of 'true' specifies that the agent generates
        ciscoLwappDot11ClientMovedToRunState notification.

        A value of 'false' specifies that the agent doesn't
        generate ciscoLwappDot11ClientMovedToRunState 
        notification." 
    ::= { cldcConfigObjects 4 }

ciscoLwappDot11ClientStaticIpFailTrapEnabled OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The object specifies the control of generation of
        ciscoLwappDot11ClientStaticIpFailTrap notification.

        A value of 'true' specifies that the agent generates
        ciscoLwappDot11ClientStaticIpFailTrap notification.

        A value of 'false' specifies that the agent doesn't
        generate ciscoLwappDot11ClientStaticIpFailTrap 
        notification."
    DEFVAL          { true } 
    ::= { cldcConfigObjects 5 }

-- ********************************************************************
-- *    NOTIFICATIONS Objects
-- ********************************************************************

cldcClientRSSI OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents the average RSSI for the mobile
        station." 
    ::= { cldcNotifObjects 1 }

cldcClientSNR OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents the average SNR for the
        mobile station." 
    ::= { cldcNotifObjects 2 }

cldcDOT11ClientReasonCode OBJECT-TYPE
    SYNTAX          INTEGER  {
                        unspecified(1),
                        previousAuthNotValid(2),
                        deauthenticationLeaving(3),
                        disassociationDueToInactivity(4),
                        disassociationAPBusy(5),
                        class2FrameFromNonAuthStation(6),
                        class2FrameFromNonAssStation(7),
                        disassociationStaHasLeft(8),
                        staReqAssociationWithoutAuth(9),
                        invalidInformationElement(40),
                        groupCipherInvalid(41),
                        unicastCipherInvalid(42),
                        akmpInvalid(43),
                        unsupportedRsnVersion(44),
                        invalidRsnIeCapabilities(45),
                        cipherSuiteRejected(46),
                        missingReasonCode(99),
                        maxAssociatedClientsReached(101),
                        maxAssociatedClientsReachedOnRadio(105),
                        maxAssociatedClientsReachedOnWlan(106),
                        unSpecifiedQosFailure(200),
                        qosPolicyMismatch(201),
                        inSufficientBandwidth(202),
                        inValidQosParams(203)
                    }
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents the reason code for failure of
        client association. 
        A value of 'unspecified' represents that the reason for failure is 
        not specified.
        A value 'previousAuthNotValid' represents that the reason for 
        failure is previous authentication was not valid.
        A value of 'deauthenticationLeaving' represents that the reason for
        failure is leaving due to deauthentication.
        A value of 'disassociationDueToInactivity' represents that the
        reason for failure is disassociation due to inactivity.
        A value of 'disassociationAPBusy' represents that the reason for 
        failure is disassociation since AP was busy.
        A value of 'class2FrameFromNonAuthStation' represents that the 
        reason for failure is class 2 frame from non authenticated 
        station.
        A value of 'class2FrameFromNonAssStation' represents that the reason
        for failure is class 2 frame from non associated station.
        A value of 'disassociationStaHasLeft' represents that the reason for
        failure is station has left due to disassociation.
        A value of 'staReqAssociationWithoutAuth' represents that the reason 
        for failure is station send association request without 
        authentication.
        A value of 'invalidInformationElement' represents that the reason 
        for failure is invalid information element.
        A value of 'groupCipherInvalid' represents that the reason for
        failure is invalid group Cipher.
        A value of 'unicastCipherInvalid' represents that the reason for 
        failure is invalid unicast cipher.
        A value of 'akmpInvalid' represents that the reason for failure is 
        invalid key management protocol.
        A value of 'unsupportedRsnVersion' represents that the reason for 
        failure is unsupported RSN version.
        A value of invalidRsnIeCapabilities' represents that the reason for 
        failure is invalid RSN IE capabilities.
        A value of 'cipherSuiteRejected' represents that the reason for 
        failure is cipher suite not valid.
        A value of 'missingReasonCode' represents that the reason for 
        failure is reason code is missing.
        A value of 'maxAssociatedClientsReached' represents that the reason 
        for failure is maximum allowed associated client number has
        reached.
        A value of 'maxAssociatedClientsReachedOnRadio' represents that the
        reason for failure is maximum allowed associated client number
        has reached on radio.
        A value of 'maxAssociatedClientsReachedOnWlan' represents that the
        reason for failure is maximum allowed associated client 
        number has reached on wlan.
        A value of 'unSpecifiedQosFailure' represents that the reason for 
        failure is QoS not supported.
        A value of 'qosPolicyMismatch' represents that the reason for 
        failure is mismatch on QOS policy.
        A value of 'inSufficientBandwidth' represents that the reason for 
        failure is insufficient bandwidth.
        A value of 'inValidQosParams' represents that the reason for failure
        is invalid QOS parameters." 
    ::= { cldcNotifObjects 3 }

cldcDOT11ClientTxDataPackets OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents the number of data packets sent
        by this mobile station" 
    ::= { cldcNotifObjects 4 }

cldcDOT11ClientTxDataBytes OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents the number of data bytes sent
        by this mobile station" 
    ::= { cldcNotifObjects 5 }

cldcDOT11ClientRxDataPackets OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents the number of data packets sent
        for this mobile station" 
    ::= { cldcNotifObjects 6 }

cldcDOT11ClientRxDataBytes OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents the number of data bytes sent
        for this mobile station" 
    ::= { cldcNotifObjects 7 }

cldcClientVlanId OBJECT-TYPE
    SYNTAX          Integer32 (0..4096)
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents VLAN ID of the interface to which
        the client is associated." 
    ::= { cldcNotifObjects 8 }

cldcClientPolicyType OBJECT-TYPE
    SYNTAX          INTEGER  {
                        dot1x(1),
                        wpa1(2),
                        wpa2(3),
                        wpa2vff(4),
                        notavailable(5),
                        unknown(6),
                        wapi(7)
                    }
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents security policy type on which
        the mobile station is associated.
        A value of 'dot1x' represents the policy type as dot1x.
        A value of 'wpa1' represents the policy type as WPA version 1.
        A value of 'wpa2' represents the policy type as WPA version 2.
        A value of 'wpa2vff' represents the policy type as WPA2VFF.
        A value of 'notavailable' represents the policy type is not
        available.
        A value of 'unknown' represents the policy type is not known.
        A value of 'wapi' represents the policy type as WAPI." 
    ::= { cldcNotifObjects 9 }

cldcClientEapType OBJECT-TYPE
    SYNTAX          INTEGER  {
                        eapTls(1),
                        ttls(2),
                        peap(3),
                        leap(4),
                        speke(5),
                        eapFast(6),
                        notavailable(7),
                        unknown(8)
                    }
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents EAP policy type used by
        the mobile station during association.
        A value of 'eapTls' represents the EAP policy type as EAP-TLS.
        A value of 'ttls' represents the EAP policy type as TTLS.
        A value of 'peap' represents the EAP policy type as PEAP.
        A value of 'leap' represents the EAP policy type as LEAP.
        A value of 'speke' represents the EAP policy type as EAP-SPEKE.
        A value of 'eapFast' represents the EAP policy type as 
        EAP-FAST.
        A value of 'notavailable' represents the EAP policy type
        is not available
        A value of 'unknown' represents the EAP policy type is 
        not known." 
    ::= { cldcNotifObjects 10 }

cldcClientAID OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents the AID allocated for the mobile
        station" 
    ::= { cldcNotifObjects 11 }

cldcClientAuthenticationAlgorithm OBJECT-TYPE
    SYNTAX          INTEGER  {
                        openSystem(1),
                        sharedKey(2),
                        unknown(3),
                        openAndEap(129)
                    }
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents the authentication algorithm
        of mobile station used for authentication.
        A value of 'openSystem' represents that the client used
        open system algorithm to get authenticated.
        A value of 'sharedKey' represents that the client used
        shared key algorithm to get authenticated.
        A value of 'unknown' represents that the algorithm used for
        authentication is not known.
        A value of 'openAndEap' represents that the client used
        open system and EAP algorithm to get authenticated." 
    ::= { cldcNotifObjects 12 }

cldcClientWepState OBJECT-TYPE
    SYNTAX          INTEGER  {
                        enable(1),
                        disable(2)
                    }
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents the WEP state of the mobile station.
        A value of 'enable' represents WEP state is enabled.
        A value of 'disable' represents WEP state is disbaled." 
    ::= { cldcNotifObjects 13 }

cldcClientEncryptionCipher OBJECT-TYPE
    SYNTAX          INTEGER  {
                        ccmpAes(1),
                        tkipMic(2),
                        wep40(3),
                        wep104(4),
                        wep128(5),
                        none(6),
                        notavailable(7),
                        unknown(8),
                        wapiSMS4(9)
                    }
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents encryption cipher selected for
        encryption of mobile station traffic.
        A value of 'ccmpAes' represents the encryption used is
        CCMP AES.
        A value of 'tkipMic' represents the encryption used is
        TKIP-MIC.
        A value of 'wep40' represents the encryption used is
        WEP40.
        A value of 'wep104' represents the encryption used is
        WEP104.
        A value of 'wep128' represents the encryption used is
        WEP128.
        A value of 'none' represents the no encryption used.
        A value of 'notavailable' represents the encryption used
        is not available.
        A value of 'unknown' represents the encryption is used is
        not known.
        A value of 'wapiSMS4' represents the encryption is used is
        WAPI-SMS4." 
    ::= { cldcNotifObjects 14 }

cldcClientPortNumber OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents the port number of this
        airespace switch on which the traffic of the 
        mobile station is coming through." 
    ::= { cldcNotifObjects 15 }

cldcClientAnchorAddressType OBJECT-TYPE
    SYNTAX          InetAddressType
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents mobility anchor address type." 
    ::= { cldcNotifObjects 16 }

cldcClientAnchorAddress OBJECT-TYPE
    SYNTAX          InetAddress
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represent anchor IP address.
        If the mobility status of the mobile station is
        anchor then it will have peer Ip address and will
        have anchor IP if the role is foreign" 
    ::= { cldcNotifObjects 17 }

cldcClientEssIndex OBJECT-TYPE
    SYNTAX          Unsigned32 (1..517)
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents the ESS index of the WLAN(SSID)
        that is being used by mobile station to connect to AP" 
    ::= { cldcNotifObjects 18 }

cldcClientCcxVersion OBJECT-TYPE
    SYNTAX          INTEGER  {
                        notSupported(1),
                        ccxv1(2),
                        ccxv2(3),
                        ccxv3(4),
                        ccxv4(5),
                        ccxv5(6),
                        ccxv6(7)
                    }
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents the Cisco Compatible Extensions (CCX)
        version the client is using for communication with the AP.
        A value of 'notSupported' represents CCX version is not 
        supported.
        A value of 'ccxv1' represents that client used CCX version 1
        for communication.
        A value of 'ccxv2' represents that client used CCX version 2
        for communication.
        A value of 'ccxv3' represents that client used CCX version 3
        for communication.
        A value of 'ccxv4' represents that client used CCX version 4
        for communication.
        A value of 'ccxv5' represents that client used CCX version 5
        for communication.
        A value of 'ccxv6' represents that client used CCX version 6
        for communication."
    DEFVAL          { notSupported } 
    ::= { cldcNotifObjects 19 }

cldcClientE2eVersion OBJECT-TYPE
    SYNTAX          INTEGER  {
                        notSupported(1),
                        e2ev1(2),
                        e2ev2(3)
                    }
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents the End-2-End Version the client is
        using for communication with the AP.
        A value of 'notSupported' represents end-2-end version 
        is not supported.
        A value of 'e2ev1' represents end-2-end version used by 
        mobile station is 1.
        A value of 'e2ev2' represents end-2-end version used by 
        mobile station is 2." 
    ::= { cldcNotifObjects 20 }

cldcClientInterface OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (0..32))
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents the name of the interface of
        the mobile client on which traffic sent to the switch." 
    ::= { cldcNotifObjects 21 }

cldcClientMobilityStatus OBJECT-TYPE
    SYNTAX          INTEGER  {
                        unassociated(1),
                        local(2),
                        anchor(3),
                        foreign(4),
                        handoff(5),
                        unknown(6),
                        exportanchor(7),
                        exportforeign(8)
                    }
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents the mobility role of the
        mobile station.
        A value of 'unassociated' represents mobility role 
        is not associated.
        A value of 'local' represents mobility role 
        is local.
        A value of 'anchor' represents mobility role 
        is anchor.
        A value of 'foreign' represents mobility role 
        is foreign.
        A value of 'handoff' represents mobility role 
        is handoff.
        A value of 'unknown' represents mobility role 
        is not known.
        A value of 'exportanchor' represents mobility role 
        is exportanchor.
        A value of 'exportforeign' represents mobility role 
        is exportforeign." 
    ::= { cldcNotifObjects 22 }

cldcClientStatusCode OBJECT-TYPE
    SYNTAX          INTEGER (0..65535)
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents status code of the mobile station" 
    ::= { cldcNotifObjects 23 }

cldcClientDeleteAction OBJECT-TYPE
    SYNTAX          INTEGER  {
                        default(1),
                        delete(2)
                    }
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents the action to deauthenticate
        the mobile station. 
        A value of 'default' represents the state as default. 
        A value of 'delete' represents the state as delete." 
    ::= { cldcNotifObjects 24 }

cldcClientSecurityPolicyStatus OBJECT-TYPE
    SYNTAX          INTEGER  {
                        completed(1),
                        notcompleted(2)
                    }
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents the security policy state of
        the mobile station.
        A value of 'completed' represents the mobile station 
        has completed the security policy checks. 
        A value of 'notcompleted' represents policy checks are yet
        to be completed for the mobile station." 
    ::= { cldcNotifObjects 25 }

cldcClientTrapEventTime OBJECT-TYPE
    SYNTAX          TimeTicks
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents the trap event time of
        the client." 
    ::= { cldcNotifObjects 26 }

cldcClientPolicyManagerState OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents the current policy enforcement
        manager state of the client in controller." 
    ::= { cldcNotifObjects 27 }

cldcClientAssocTime OBJECT-TYPE
    SYNTAX          TimeStamp
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents the time at which client associated" 
    ::= { cldcNotifObjects 28 }

cldcClientPmipDataValid OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents whether client has valid PMIP data." 
    ::= { cldcNotifObjects 29 }

cldcClientMobilityExtDataValid OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents new mobility status." 
    ::= { cldcNotifObjects 30 }

cldcClientPolicyErrors OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents the number of policy
        errors for mobile station" 
    ::= { cldcNotifObjects 31 }

cldcClientSessionId OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents the session
        to which the client is associated." 
    ::= { cldcNotifObjects 32 }

cldcClientPmipNai OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object represents the name of the
        profile, the client is associated to." 
    ::= { cldcNotifObjects 33 }

cldcClientPmipState OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object indicates the state of the PMIP client:
        null: binding doesn't exist
        init: binding created, Retx timer running for PBU, binding not 
                   yet accepted from LMA, Tunnel/route is not yet setup
        active:  binding accepted by LMA, refresh timer running, 
                          Tunnel/route setup complete. 
        refreshPending: Refresh timer expired and Retx timer running. 
                                 PBU refresh sent, PBA not yet received from LMA, 
                                 (Tunnel/route is already setup).
        disconnectingSt: Dereg reply is expected.  Retx  timer is   
                     running, tunnel/route is still setup." 
    ::= { cldcNotifObjects 34 }

cldcClientPmipInterface OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (1..32))
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object indicates the interface to which the
        client is associated." 
    ::= { cldcNotifObjects 35 }

cldcClientPmipHomeAddrType OBJECT-TYPE
    SYNTAX          InetAddressType
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object indicates the type of the Client's Home
        address made available through cldcClientPmipHomeAddress." 
    ::= { cldcNotifObjects 36 }

cldcClientPmipHomeAddr OBJECT-TYPE
    SYNTAX          InetAddress
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object indicates the Home Address of the client." 
    ::= { cldcNotifObjects 37 }

cldcClientPmipAtt OBJECT-TYPE
    SYNTAX          INTEGER  {
                        reserved(1),
                        logicalNetworkInterface(2),
                        pointToPointInterface(3),
                        ethernet(4),
                        wirelessLan(5),
                        wimax(6),
                        threeGPPGERAN(7),
                        threeGPPUTRAN(8),
                        threeGPPETRAN(9),
                        threeGPP2eHRPD(10),
                        threeGPP2HRPD(11),
                        threeGPP21xRTT(12),
                        threeGPP2UMB(13)
                    }
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object indicates the access technology type by which
        the client is currently attached.
        A value of 'reserved' indicates this value is reserved for
        future use.
        A value of 'logicalNetworkInterface' indicates that the 
        client used logical network interface to connect to network.
        A value of 'pointToPointInterface' indicates that the 
        client used point to point interface to connect to network.
        A value of 'ethernet' indicates that the client used 
        ethernet to connect to network.
        A value of 'wirelessLan' indicates that the 
        client used wireless LAN to connect to network.
        A value of 'wimax' indicates that the 
        client used WiMAX technology to connect to network.
        A value of 'threeGPPGERAN' indicates that the 
        client used threeGPPGERAN technology to connect to network.
        A value of 'threeGPPUTRAN' indicates that the 
        client used threeGPPUTRAN technology to connect to network.
        A value of 'threeGPPETRAN' indicates that the 
        client used threeGPPETRAN technology to connect to network.
        A value of 'threeGPP2eHRPD' indicates that the 
        client used threeGPP2eHRPD technology to connect to network.
        A value of 'threeGPP2HRPD' indicates that the 
        client used threeGPP2HRPD technology to connect to network.
        A value of 'threeGPP21xRTT' indicates that the 
        client used threeGPP21xRTT technology to connect to network.
        A value of 'threeGPP2UMB' indicates that the 
        client used threeGPP2UMB technology to connect to network." 
    ::= { cldcNotifObjects 38 }

cldcClientPmipLocalLinkId OBJECT-TYPE
    SYNTAX          MacAddress
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object indicates the local link identifier of
        the client." 
    ::= { cldcNotifObjects 39 }

cldcClientPmipLmaName OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object indicates the LMA to which the client is
        connected." 
    ::= { cldcNotifObjects 40 }

cldcClientPmipLifeTime OBJECT-TYPE
    SYNTAX          TimeTicks
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object indicates the duration of the PMIP client
        association." 
    ::= { cldcNotifObjects 41 }

cldcClientPmipDomainName OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object indicates the domain to which the PMIP
        client is associated." 
    ::= { cldcNotifObjects 42 }

cldcClientPmipUpKey OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object indicates the upstream key of the PMIP client." 
    ::= { cldcNotifObjects 43 }

cldcClientPmipDownKey OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      accessible-for-notify
    STATUS          current
    DESCRIPTION
        "This object indicates the downstream key of the PMIP client." 
    ::= { cldcNotifObjects 44 }

-- ********************************************************************
-- *    NOTIFICATIONS
-- ********************************************************************

ciscoLwappDot11ClientKeyDecryptError NOTIFICATION-TYPE
    OBJECTS         {
                        cldcAssociationMode,
                        cldcClientMacAddress,
                        cldcApMacAddress,
                        cldcIfType,
                        cLApName,
                        cldcClientAuthMode
                    }
    STATUS          current
    DESCRIPTION
        "This notification is generated when a decrypt error occurs.
        The WEP WPA or WPA2 Key configured at the station may be 
        wrong.
        cldcAssociationMode represents the association mode for 
        which the key decrypt error occurred.
        cldcApMacAddress represents the MacAddress of the AP to 
        which the client is associated.
        cldcIfType represents the wireless interface type of the
        client.
        cLApName represents the name of the AP to which the client
        is associated."
   ::= { ciscoLwappDot11ClientMIBNotifs 1 }

ciscoLwappDot11ClientAssocNacAlert NOTIFICATION-TYPE
    OBJECTS         {
                        cldcClientMacAddress,
                        cldcClientWlanProfileName,
                        cldcClientIPAddress,
                        cldcApMacAddress,
                        cldcClientQuarantineVLAN,
                        cldcClientAccessVLAN,
                        cldcClientAuthMode
                    }
    STATUS          current
    DESCRIPTION
        "This notification is generated when the client on NAC
        enabled SSIDs complete layer2 authentication . This is
        to inform about client's presence to the NAC appliance.
        cldcClientWlanProfileName represents the profile name of the 
        WLAN, this 802.11 wireless client is connected to.
        cldcClientIPAddress represents the unique ipaddress of the 
        client.
        cldcApMacAddress represents the MacAddress of the AP to 
        which the client is associated.
        cldcClientQuarantineVLAN represents the quarantine VLAN for 
        the client.
        cldcClientAccessVLAN represents the access VLAN for the 
        client."
   ::= { ciscoLwappDot11ClientMIBNotifs 2 }

ciscoLwappDot11ClientDisassocNacAlert NOTIFICATION-TYPE
    OBJECTS         {
                        cldcClientMacAddress,
                        cldcClientWlanProfileName,
                        cldcClientIPAddress,
                        cldcApMacAddress,
                        cldcClientQuarantineVLAN,
                        cldcClientAccessVLAN
                    }
    STATUS          current
    DESCRIPTION
        "This notification is generated when the controller removes
        the client entry on NAC enabled SSIDs.
        cldcClientWlanProfileName represents the profile name of the
        WLAN, this 802.11 wireless client is connected to.
        cldcClientIPAddress represents the unique ipaddress of the 
        client.
        cldcApMacAddress represents the MacAddress of the AP to which
        the client is associated.
        cldcClientQuarantineVLAN represents the quarantine VLAN for 
        the client.
        cldcClientAccessVLAN represents the access VLAN for the 
        client.
        This is issued on NAC enabled ssids, whenever WLC removes
        client's entry."
   ::= { ciscoLwappDot11ClientMIBNotifs 3 }

ciscoLwappDot11ClientMovedToRunState NOTIFICATION-TYPE
    OBJECTS         {
                        cldcClientMacAddress,
                        cldcClientIPAddress,
                        cldcClientUsername,
                        cldcClientSSID,
                        cldcApMacAddress,
                        cLApDot11IfSlotId,
                        cLApName
                    }
    STATUS          current
    DESCRIPTION
        "This notification is generated when the client completes
        the PEM state and moves to the RUN state.
        cldcClientUsername represents the username used by the 
        client.
        cldcClientIPAddress represents the unique ipaddress of the 
        client.
        cldcClientSSID represents the SSID of the WLAN to which the 
        client is associated.
        cldcApMacAddress represents the MacAddress of the AP to 
        which the client is associated.
        cLApDot11IfSlotId represents the slotId of the AP to which
        the client is associated.
        cLApName represents the name of the AP to which the client 
        is associated."
   ::= { ciscoLwappDot11ClientMIBNotifs 4 }

ciscoLwappDot11ClientStaticIpFailTrap NOTIFICATION-TYPE
    OBJECTS         {
                        cldcClientMacAddress,
                        cldcClientIPAddress
                    }
    STATUS          current
    DESCRIPTION
        "This is issued whenever the subnet defined for the
        static IP of a client is not found."
   ::= { ciscoLwappDot11ClientMIBNotifs 5 }

ciscoLwappDot11ClientDisassocDataStatsTrap NOTIFICATION-TYPE
    OBJECTS         {
                        cLApName,
                        cLApDot11IfSlotId,
                        cldcClientByIpAddressType,
                        cldcClientByIpAddress,
                        cldcApMacAddress,
                        cldcClientReasonCode,
                        cldcClientUsername,
                        cldcClientSSID,
                        cldcClientSessionID,
                        cldcClientTxDataPackets,
                        cldcClientTxDataBytes,
                        cldcClientRxDataPackets,
                        cldcClientRxDataBytes
                    }
    STATUS          current
    DESCRIPTION
        "The disassociate notification shall be sent when the Station
        sends a Disassociation frame. The value of the notification
        shall include the MAC address of the MAC to which the 
        Disassociation frame was sent and the reason for the 
        disassociation"
   ::= { ciscoLwappDot11ClientMIBNotifs 6 }

ciscoLwappDot11ClientAssocDataStatsTrap NOTIFICATION-TYPE
    OBJECTS         {
                        cLApDot11IfSlotId,
                        cldcClientByIpAddressType,
                        cldcClientByIpAddress,
                        cldcApMacAddress,
                        cldcClientUsername,
                        cldcClientApRoamMacAddress,
                        cldcClientSSID,
                        cldcClientTxDataPackets,
                        cldcClientTxDataBytes,
                        cldcClientRxDataPackets,
                        cldcClientRxDataBytes
                    }
    STATUS          current
    DESCRIPTION
        "The associate notification shall be sent when the Station
        sends a association frame."
   ::= { ciscoLwappDot11ClientMIBNotifs 7 }

ciscoLwappDot11ClientSessionTrap NOTIFICATION-TYPE
    OBJECTS         {
                        cLApDot11IfSlotId,
                        cLApName,
                        cldcClientByIpAddressType,
                        cldcClientByIpAddress,
                        cldcClientUsername,
                        cldcClientSSID,
                        cldcClientSessionID,
                        cldcApMacAddress
                    }
    STATUS          current
    DESCRIPTION
        "Issued when the client completes the PEM state and moves
        to the RUN state."
   ::= { ciscoLwappDot11ClientMIBNotifs 8 }

ciscoLwappDot11ClientAssocTrap NOTIFICATION-TYPE
    OBJECTS         {
                        cldcClientTrapEventTime,
                        cldcClientMacAddress,
                        cldcClientByIpAddressType,
                        cldcClientByIpAddress,
                        cldcClientPolicyType,
                        cldcClientStatus,
                        cldcClientAID,
                        cldcApMacAddress,
                        cLApDot11IfSlotId,
                        cldcClientSSID,
                        cldcClientAuthenticationAlgorithm,
                        cldcClientEncryptionCipher,
                        cldcClientPortNumber,
                        cldcClientAnchorAddressType,
                        cldcClientAnchorAddress,
                        cldcClientEssIndex,
                        cldcClientWlanProfileName,
                        cldcClientWgbStatus,
                        cldcClientWgbMacAddress,
                        cldcClientCcxVersion,
                        cldcClientE2eVersion,
                        cldcClientInterface,
                        cldcClient80211uCapable,
                        cldcClientMobilityStatus,
                        cldcClientRSSI,
                        cldcClientSNR,
                        cldcClientSecurityPolicyStatus,
                        cldcClientLoginTime,
                        cldcClientAssocTime,
                        cldcClientCurrentTxRateSet,
                        cldcClientDataRateSet,
                        cldcClientHreapApAuth,
                        cldccCcxFoundationServiceVersion,
                        cldccCcxLocationServiceVersion,
                        cldccCcxVoiceServiceVersion,
                        cldccCcxManagementServiceVersion,
                        cldcClientDataSwitching,
                        cldcClientAuthentication,
                        cLApDot11RadioChannelNumber,
                        cLApIfLoadChannelUtilization,
                        cLApLocation,
                        cLAPGroupVlanName,
                        cLApSubMode,
                        cldcClientIPAddress,
                        cldcClientSessionId,
                        cldcClientVlanId,
                        cldcClientProtocol,
                        cldcClientEapType,
                        cldcClientPolicyErrors,
                        cldcClientDataRetries,
                        cldcClientRtsRetries,
                        cldcClientDataBytesSent,
                        cldcClientDataBytesReceived,
                        cldcClientDataPacketsSent,
                        cldcClientDataPacketsReceived,
                        cldcClientTxDataBytesDropped,
                        cldcClientRxDataBytesDropped,
                        cldcClientTxDataPacketsDropped,
                        cldcClientRxDataPacketsDropped
                    }
    STATUS          current
    DESCRIPTION
        "The notification shall be sent when the Station
        associats to controller."
   ::= { ciscoLwappDot11ClientMIBNotifs 9 }

ciscoLwappDot11ClientDeAuthenticatedTrap NOTIFICATION-TYPE
    OBJECTS         {
                        cldcClientTrapEventTime,
                        cldcClientUpTime,
                        cldcClientMacAddress,
                        cldcClientByIpAddressType,
                        cldcClientByIpAddress,
                        cldcClientPostureState,
                        cldcClientProtocol,
                        cldcClientVlanId,
                        cldcClientPolicyType,
                        cldcClientEapType,
                        cldcClientStatus,
                        cldcClientAID,
                        cldcApMacAddress,
                        cLApDot11IfSlotId,
                        cldcClientSSID,
                        cldcClientAuthenticationAlgorithm,
                        cldcClientWepState,
                        cldcClientEncryptionCipher,
                        cldcClientPortNumber,
                        cldcClientAnchorAddressType,
                        cldcClientAnchorAddress,
                        cldcClientEssIndex,
                        cldcClientWlanProfileName,
                        cldcClientWgbStatus,
                        cldcClientWgbMacAddress,
                        cldcClientCcxVersion,
                        cldcClientE2eVersion,
                        cldcClientInterface,
                        cldcClient80211uCapable,
                        cldcClientMobilityStatus,
                        cldcClientRSSI,
                        cldcClientSNR,
                        cldcClientDataRetries,
                        cldcClientRtsRetries,
                        cldcClientUsername,
                        cldcDOT11ClientReasonCode,
                        cldcClientStatusCode,
                        cldcClientDeleteAction,
                        cldcClientSecurityPolicyStatus,
                        cldcClientNacState,
                        cldcClientLoginTime,
                        cldcClientAssocTime,
                        cldcClientCurrentTxRateSet,
                        cldcClientDataRateSet,
                        cldcClientHreapApAuth,
                        cldccCcxFoundationServiceVersion,
                        cldccCcxLocationServiceVersion,
                        cldccCcxVoiceServiceVersion,
                        cldccCcxManagementServiceVersion,
                        cldcClientDataSwitching,
                        cldcClientAuthentication,
                        cldcClientByIpAddressDiscoverType,
                        cldcClientByIpAddressLastSeen,
                        cldcClientPowerSaveMode,
                        cLApDot11RadioChannelNumber,
                        cLApIfLoadChannelUtilization,
                        cLApLocation,
                        cLAPGroupVlanName,
                        cLApSubMode,
                        cldcClientIPAddress,
                        cldcClientPolicyErrors,
                        cldcClientPolicyManagerState,
                        cldcClientDataBytesSent,
                        cldcClientDataBytesReceived,
                        cldcClientDataPacketsSent,
                        cldcClientDataPacketsReceived,
                        cldcClientTxDataBytesDropped,
                        cldcClientRxDataBytesDropped,
                        cldcClientTxDataPacketsDropped,
                        cldcClientRxDataPacketsDropped,
                        cldcClientSessionId
                    }
    STATUS          current
    DESCRIPTION
        "The notification shall be sent when the Station
        gets de-authenticated."
   ::= { ciscoLwappDot11ClientMIBNotifs 10 }

ciscoLwappDot11ClientMovedToRunStateNewTrap NOTIFICATION-TYPE
    OBJECTS         {
                        cldcClientTrapEventTime,
                        cldcClientMacAddress,
                        cldcClientByIpAddressType,
                        cldcClientByIpAddress,
                        cldcClientPostureState,
                        cldcClientProtocol,
                        cldcClientVlanId,
                        cldcClientPolicyType,
                        cldcClientEapType,
                        cldcClientStatus,
                        cldcClientAID,
                        cldcApMacAddress,
                        cLApDot11IfSlotId,
                        cldcClientWlanProfileName,
                        cldcClientAuthenticationAlgorithm,
                        cldcClientWepState,
                        cldcClientEncryptionCipher,
                        cldcClientPortNumber,
                        cldcClientAnchorAddressType,
                        cldcClientAnchorAddress,
                        cldcClientEssIndex,
                        cldcClientWgbStatus,
                        cldcClientWgbMacAddress,
                        cldcClientCcxVersion,
                        cldcClientE2eVersion,
                        cldcClient80211uCapable,
                        cldcClientMobilityStatus,
                        cldcClientRSSI,
                        cldcClientSNR,
                        cldcClientDataRetries,
                        cldcClientRtsRetries,
                        cldcClientUsername,
                        cldcClientStatusCode,
                        cldcClientSecurityPolicyStatus,
                        cldcClientNacState,
                        cldcClientLoginTime,
                        cldcClientDataRateSet,
                        cldcClientHreapApAuth,
                        cldccCcxFoundationServiceVersion,
                        cldccCcxLocationServiceVersion,
                        cldccCcxVoiceServiceVersion,
                        cldccCcxManagementServiceVersion,
                        cldcClientDataSwitching,
                        cldcClientAuthentication,
                        cldcClientByIpAddressDiscoverType,
                        cldcClientByIpAddressLastSeen,
                        cldcClientPowerSaveMode,
                        cLApDot11RadioChannelNumber,
                        cLApIfLoadChannelUtilization,
                        cLApSubMode,
                        cldcClientIPAddress,
                        cldcClientPolicyManagerState,
                        cldcClientPmipNai,
                        cldcClientPmipState,
                        cldcClientPmipInterface,
                        cldcClientPmipHomeAddrType,
                        cldcClientPmipHomeAddr,
                        cldcClientPmipAtt,
                        cldcClientPmipLocalLinkId,
                        cldcClientPmipDomainName,
                        cldcClientPmipLmaName,
                        cldcClientPmipUpKey,
                        cldcClientPmipDownKey,
                        cldcClientPmipLifeTime,
                        cLMobilityExtMCClientAnchorMCPrivateAddressType,
                        cLMobilityExtMCClientAnchorMCPrivateAddress,
                        cLMobilityExtMCClientAssociatedMAAddressType,
                        cLMobilityExtMCClientAssociatedMAAddress,
                        cLMobilityExtMCClientAssociatedMCAddressType,
                        cLMobilityExtMCClientAssociatedMCAddress,
                        cLMobilityExtMCClientAssociatedMCGroupId,
                        cLMobilityExtMCClientAnchorMCGroupId,
                        cldcClientPmipDataValid,
                        cldcClientMobilityExtDataValid,
                        cldcClientSessionId
                    }
    STATUS          current
    DESCRIPTION
        "The notification shall be sent when the Station
        moves to run or authenticated state."
   ::= { ciscoLwappDot11ClientMIBNotifs 11 }

ciscoLwappDot11ClientMobilityTrap NOTIFICATION-TYPE
    OBJECTS         {
                        cldcClientTrapEventTime,
                        cldcClientUpTime,
                        cldcClientMacAddress,
                        cldcClientByIpAddressType,
                        cldcClientByIpAddress,
                        cldcClientPostureState,
                        cldcClientProtocol,
                        cldcClientVlanId,
                        cldcClientPolicyType,
                        cldcClientEapType,
                        cldcClientStatus,
                        cldcClientAID,
                        cldcApMacAddress,
                        cLApDot11IfSlotId,
                        cldcClientSSID,
                        cldcClientAuthenticationAlgorithm,
                        cldcClientWepState,
                        cldcClientEncryptionCipher,
                        cldcClientPortNumber,
                        cldcClientAnchorAddressType,
                        cldcClientAnchorAddress,
                        cldcClientEssIndex,
                        cldcClientWlanProfileName,
                        cldcClientWgbStatus,
                        cldcClientWgbMacAddress,
                        cldcClientCcxVersion,
                        cldcClientE2eVersion,
                        cldcClientInterface,
                        cldcClient80211uCapable,
                        cldcClientMobilityStatus,
                        cldcClientRSSI,
                        cldcClientSNR,
                        cldcClientDataRetries,
                        cldcClientRtsRetries,
                        cldcClientUsername,
                        cldcDOT11ClientReasonCode,
                        cldcClientStatusCode,
                        cldcClientDeleteAction,
                        cldcClientSecurityPolicyStatus,
                        cldcClientNacState,
                        cldcClientLoginTime,
                        cldcClientAssocTime,
                        cldcClientCurrentTxRateSet,
                        cldcClientDataRateSet,
                        cldcClientHreapApAuth,
                        cldccCcxFoundationServiceVersion,
                        cldccCcxLocationServiceVersion,
                        cldccCcxVoiceServiceVersion,
                        cldccCcxManagementServiceVersion,
                        cldcClientDataSwitching,
                        cldcClientAuthentication,
                        cldcClientByIpAddressDiscoverType,
                        cldcClientByIpAddressLastSeen,
                        cldcClientPowerSaveMode,
                        cLApDot11RadioChannelNumber,
                        cLApIfLoadChannelUtilization,
                        cLApLocation,
                        cLAPGroupVlanName,
                        cLApSubMode,
                        cldcClientIPAddress,
                        cldcClientPolicyErrors,
                        cldcClientPolicyManagerState,
                        cldcClientDataBytesSent,
                        cldcClientDataBytesReceived,
                        cldcClientDataPacketsSent,
                        cldcClientDataPacketsReceived,
                        cldcClientTxDataBytesDropped,
                        cldcClientRxDataBytesDropped,
                        cldcClientTxDataPacketsDropped,
                        cldcClientRxDataPacketsDropped,
                        cldcClientSessionId
                    }
    STATUS          current
    DESCRIPTION
        "The notification shall be sent when the Station
        gets roamed."
   ::= { ciscoLwappDot11ClientMIBNotifs 12 }
-- *******************************************************************
-- *    Compliance statements
-- ********************************************************************

ciscoLwappDot11ClientMIBCompliances  OBJECT IDENTIFIER
    ::= { ciscoLwappDot11ClientMIBConform 1 }

ciscoLwappDot11ClientMIBGroups  OBJECT IDENTIFIER
    ::= { ciscoLwappDot11ClientMIBConform 2 }

ciscoLwappDot11CCXClientMIBConform  OBJECT IDENTIFIER
    ::= { ciscoLwappDot11ClientMIBConform 3 }

ciscoLwappDot11ClientCCXV5ReportingMIBConform  OBJECT IDENTIFIER
    ::= { ciscoLwappDot11ClientMIBConform 4 }


ciscoLwappDot11ClientMIBCompliance MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "The compliance statement for the SNMP entities that
        implement this MIB."
    MODULE          -- this module
    MANDATORY-GROUPS {
                        ciscoLwappDot11ClientMIBConfigGroup,
                        ciscoLwappDot11ClientMIBNotifsGroup,
                        ciscoLwappDot11ClientMIBStatusGroup
                    }
    ::= { ciscoLwappDot11ClientMIBCompliances 1 }

ciscoLwappDot11ClientMIBComplianceRev2 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "The compliance statement for the SNMP entities that
        implement this MIB."
    MODULE          -- this module
    MANDATORY-GROUPS {
                        ciscoLwappDot11ClientMIBConfigGroup,
                        ciscoLwappDot11ClientMIBNotifsGroup,
                        ciscoLwappDot11ClientMIBStatusGroup,
                        ciscoLwappDot11ClientMIBStatusGroupRev2,
                        ciscoLwappDot11ClientMIBNotifsGroupRev2,
                        ciscoLwappDot11ClientMIBNotifControlGroup
                    }
    ::= { ciscoLwappDot11ClientMIBCompliances 2 }

ciscoLwappDot11ClientMIBComplianceRev3 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "The compliance statement for the SNMP entities that
        implement this MIB."
    MODULE          -- this module
    MANDATORY-GROUPS {
                        ciscoLwappDot11ClientMIBConfigGroup,
                        ciscoLwappDot11ClientMIBNotifsGroup,
                        ciscoLwappDot11ClientMIBStatusGroup,
                        ciscoLwappDot11ClientMIBStatusGroupRev2,
                        ciscoLwappDot11ClientMIBNotifsGroupRev2,
                        ciscoLwappDot11ClientMIBNotifControlGroup,
                        ciscoLwappDot11ClientMIBStatusGroupRev2Sup,
                        ciscoLwappDot11ClientMIBCcxGroup
                    }
    ::= { ciscoLwappDot11ClientMIBCompliances 3 }

ciscoLwappDot11ClientMIBComplianceRev4 MODULE-COMPLIANCE
    STATUS          current
    DESCRIPTION
        "The compliance statement for the SNMP entities that
        implement this MIB."
    MODULE          -- this module
    MANDATORY-GROUPS {
                        ciscoLwappDot11ClientMIBConfigGroup,
                        ciscoLwappDot11ClientMIBNotifsGroup,
                        ciscoLwappDot11ClientMIBStatusGroup,
                        ciscoLwappDot11ClientMIBStatusGroupRev2,
                        ciscoLwappDot11ClientMIBNotifsGroupRev2,
                        ciscoLwappDot11ClientMIBNotifControlGroup,
                        ciscoLwappDot11ClientMIBStatusGroupRev2Sup,
                        ciscoLwappDot11ClientMIBCcxGroup,
                        ciscoLwappDot11ClientMIBSup1Group
                    }
    ::= { ciscoLwappDot11ClientMIBCompliances 4 }

-- ********************************************************************
-- *    Units of conformance
-- ********************************************************************

ciscoLwappDot11ClientMIBConfigGroup OBJECT-GROUP
    OBJECTS         { cldcKeyDecryptErrorEnabled }
    STATUS          current
    DESCRIPTION
        "This collection of objects specifies the required
        configuration parameters for the 802.11 wireless 
        clients."
    ::= { ciscoLwappDot11ClientMIBGroups 1 }

ciscoLwappDot11ClientMIBNotifsGroup NOTIFICATION-GROUP
   NOTIFICATIONS    { ciscoLwappDot11ClientKeyDecryptError }
    STATUS          current
    DESCRIPTION
        "This collection of objects specifies the
        notifications for the 802.11 wireless clients."
    ::= { ciscoLwappDot11ClientMIBGroups 2 }

ciscoLwappDot11ClientMIBStatusGroup OBJECT-GROUP
    OBJECTS         {
                        cldcClientStatus,
                        cldcClientWlanProfileName,
                        cldcClientWgbStatus,
                        cldcClientWgbMacAddress,
                        cldcClientProtocol,
                        cldcAssociationMode,
                        cldcApMacAddress,
                        cldcIfType,
                        cldcClientIPAddress,
                        cldcClientNacState,
                        cldcClientQuarantineVLAN,
                        cldcClientAccessVLAN,
                        cldcClientAuthMode,
                        cldcClientDataSwitching,
                        cldcClientAuthentication,
                        cldcClientChannel,
                        cldcClientReasonCode,
                        cldcClientSessionID,
                        cldcClientApRoamMacAddress,
                        cldcClientMdnsProfile,
                        cldcClientMdnsAdvCount,
                        cldcClientPolicyName,
                        cldcClientAAARole,
                        cldcClientDeviceType,
                        cldcUserAuthType,
                        cldcClientTunnelType,
                        cldcClientMaxDataRate,
                        cldcClientHtCapable,
                        cldcClientVhtCapable,
                        cldcClientByIpAddressLastSeen
                    }
    STATUS          current
    DESCRIPTION
        "This collection of objects specifies the required
        status parameters for the 802.11 wireless clients."
    ::= { ciscoLwappDot11ClientMIBGroups 3 }

ciscoLwappDot11ClientMIBStatusGroupRev2 OBJECT-GROUP
    OBJECTS         {
                        cldcClientLoginTime,
                        cldcClientUpTime,
                        cldcClientPowerSaveMode,
                        cldcClientCurrentTxRateSet,
                        cldcClientDataRateSet,
                        cldcClientHreapApAuth,
                        cldcClient80211uCapable,
                        cldcClientDataRetries,
                        cldcClientRtsRetries,
                        cldcClientDuplicatePackets,
                        cldcClientDecryptFailures,
                        cldcClientMicErrors,
                        cldcClientMicMissingFrames,
                        cldcClientIPAddress,
                        cldcClientNacState,
                        cldcClientQuarantineVLAN,
                        cldcClientAccessVLAN,
                        cldcClientPostureState,
                        cldcClientAclName,
                        cldcClientAclApplied,
                        cldcClientRedirectUrl,
                        cldcClientAaaOverrideAclName,
                        cldcClientAaaOverrideAclApplied,
                        cldcClientUsername,
                        cldcClientSSID,
                        cldcSleepingClientSsid,
                        cldcSleepingClientUserName,
                        cldcSleepingClientRemainingTime,
                        cldcSleepingClientRowStatus,
                        cldcClientDataBytesReceived,
                        cldcClientRealtimeBytesReceived,
                        cldcClientRxDataBytesDropped,
                        cldcClientRxRealtimeBytesDropped,
                        cldcClientDataBytesSent,
                        cldcClientRealtimeBytesSent,
                        cldcClientTxDataBytesDropped,
                        cldcClientTxRealtimeBytesDropped,
                        cldcClientDataPacketsReceived,
                        cldcClientRealtimePacketsReceived,
                        cldcClientRxDataPacketsDropped,
                        cldcClientRxRealtimePacketsDropped,
                        cldcClientDataPacketsSent,
                        cldcClientRealtimePacketsSent,
                        cldcClientTxDataPacketsDropped,
                        cldcClientTxRealtimePacketsDropped,
                        cldcClientTxDataPackets,
                        cldcClientTxDataBytes,
                        cldcClientRxDataPackets,
                        cldcClientRxDataBytes,
                        ciscoLwappDot11ClientStaticIpFailTrapEnabled,
                        cldcClientCurrentTxRate
                    }
    STATUS          current
    DESCRIPTION
        "This collection of objects specifies the required
        status parameters for the 802.11 wireless clients."
    ::= { ciscoLwappDot11ClientMIBGroups 4 }

ciscoLwappDot11ClientMIBNotifsGroupRev2 NOTIFICATION-GROUP
   NOTIFICATIONS    {
                        ciscoLwappDot11ClientAssocNacAlert,
                        ciscoLwappDot11ClientDisassocNacAlert,
                        ciscoLwappDot11ClientMovedToRunState,
                        ciscoLwappDot11ClientStaticIpFailTrap,
                        ciscoLwappDot11ClientDisassocDataStatsTrap,
                        ciscoLwappDot11ClientAssocDataStatsTrap,
                        ciscoLwappDot11ClientSessionTrap,
                        ciscoLwappDot11ClientAssocTrap,
                        ciscoLwappDot11ClientDeAuthenticatedTrap,
                        ciscoLwappDot11ClientMovedToRunStateNewTrap,
                        ciscoLwappDot11ClientMobilityTrap
                    }
    STATUS          current
    DESCRIPTION
        "This collection of objects represents the
        notifications for the 802.11 wireless clients."
    ::= { ciscoLwappDot11ClientMIBGroups 5 }

ciscoLwappDot11ClientMIBNotifControlGroup OBJECT-GROUP
    OBJECTS         {
                        cldcAssocNacAlertEnabled,
                        cldcDisassocNacAlertEnabled,
                        cldcMovedToRunStateEnabled
                    }
    STATUS          current
    DESCRIPTION
        "This collection of objects represents the objects that
        control the notifications for the 802.11 wireless 
        clients."
    ::= { ciscoLwappDot11ClientMIBGroups 6 }

ciscoLwappDot11ClientMIBStatusGroupRev2Sup OBJECT-GROUP
    OBJECTS         {
                        cldcClientSecurityTagId,
                        cldcClientTypeKTS,
                        cldcClientIpv6AclName,
                        cldcClientIpv6AclApplied,
                        cldcClientByIpAddressDiscoverType,
                        cldcClientRaPacketsDropped,
                        cldcClientInterimUpdatesCount
                    }
    STATUS          current
    DESCRIPTION
        "This collection of objects specifies the required
        status parameters for the 802.11 wireless clients and it
        supplements ciscoLwappDot11ClientMIBStatusGroupRev2."
    ::= { ciscoLwappDot11ClientMIBGroups 7 }

ciscoLwappDot11ClientMIBCcxGroup OBJECT-GROUP
    OBJECTS         {
                        cldccCcxFoundationServiceVersion,
                        cldccCcxLocationServiceVersion,
                        cldccCcxVoiceServiceVersion,
                        cldccCcxManagementServiceVersion
                    }
    STATUS          current
    DESCRIPTION
        "This collection of objects provides the 802.11 wireless CCX
        clients information."
    ::= { ciscoLwappDot11ClientMIBGroups 8 }

ciscoLwappDot11ClientMIBSup1Group OBJECT-GROUP
    OBJECTS         {
                        cldcClientRSSI,
                        cldcClientSNR,
                        cldcDOT11ClientReasonCode,
                        cldcDOT11ClientTxDataPackets,
                        cldcDOT11ClientTxDataBytes,
                        cldcDOT11ClientRxDataPackets,
                        cldcDOT11ClientRxDataBytes,
                        cldcClientVlanId,
                        cldcClientPolicyType,
                        cldcClientEapType,
                        cldcClientAID,
                        cldcClientAuthenticationAlgorithm,
                        cldcClientWepState,
                        cldcClientEncryptionCipher,
                        cldcClientPortNumber,
                        cldcClientAnchorAddressType,
                        cldcClientAnchorAddress,
                        cldcClientEssIndex,
                        cldcClientCcxVersion,
                        cldcClientE2eVersion,
                        cldcClientInterface,
                        cldcClientMobilityStatus,
                        cldcClientStatusCode,
                        cldcClientDeleteAction,
                        cldcClientSecurityPolicyStatus,
                        cldcClientTrapEventTime,
                        cldcClientPolicyManagerState,
                        cldcClientAssocTime,
                        cldcClientPmipDataValid,
                        cldcClientMobilityExtDataValid,
                        cldcClientPolicyErrors,
                        cldcClientSessionId,
                        cldcClientPmipNai,
                        cldcClientPmipState,
                        cldcClientPmipInterface,
                        cldcClientPmipHomeAddrType,
                        cldcClientPmipHomeAddr,
                        cldcClientPmipAtt,
                        cldcClientPmipLocalLinkId,
                        cldcClientPmipLmaName,
                        cldcClientPmipLifeTime,
                        cldcClientPmipDomainName,
                        cldcClientPmipUpKey,
                        cldcClientPmipDownKey
                    }
    STATUS          current
    DESCRIPTION
        "This collection of objects provides the 802.11 wireless
        clients notifications information."
    ::= { ciscoLwappDot11ClientMIBGroups 9 }

END


