
Changes with Angie 1.8.1                                         28 Dec 2024

    *) Bugfix: using the "status_zone" directive in the "server" block of
       the HTTP module caused excessive logging of empty requests in
       "access_log" on TLS handshakes; the bug had appeared in 1.8.0.

    *) Bugfix: decoding errors in HTTP/3 stream could cause worker process
       crash when closing QUIC connection; the fix was ported from nginx
       1.27.4.

    *) Bugfix: sending QUIC protocol version negotiation packets could cause
       an infinite packet exchange loop; the fix was ported from nginx
       1.27.4.

    *) Bugfix: using DNS-challenge without hooks in the ACME module could
       cause a worker process crash in some configurations.


Changes with Angie 1.8.0                                         19 Dec 2024

    *) Change: when gracefully shutting down old worker processes,
       keep-alive connections are now closed only after the timeout
       specified by the "lingering_timeout" directive has expired; this
       behaviour allows to avoid possible client errors when receiving
       replies at that moment.
       Thanks to Maxim Dounin (freenginx).

    *) Change: disabled caching of the "stream" module variables
       "$ssl_server_name", "$ssl_server_cert_type", "$ssl_preread_protocol",
       and "$ssl_preread_server_name", which allows to get actual values
       when using virtual servers.

    *) Feature: support of "DNS-01" challenges by handling DNS queries from
       the ACME server, which allows to automatically request certificates
       of any types, including wildcard ones.

    *) Feature: hooks system in the ACME module, configurable using the
       "acme_hook" directive, which allows handling of domain name
       challenges using an external application to provide integration with
       various services and DNS hosting providers.

    *) Feature: the ACME module logs some additional information: why
       exactly the certificate is being renewed, full domain name list,
       client's account ID, long periods of inactivity (e.g. pollings), and
       the domain name being challenged; this information simplifies
       troubleshooting and allows to specify the CAA DNS record.

    *) Feature: the "account_key" parameter of the "acme_client" directive,
       which allows to reuse an existing key for the ACME server account
       instead of auto-generating a new one.

    *) Feature: support for variables in the "status_zone" directives in the
       stream and HTTP modules allows to dynamically account statistics
       within several zones in a single "location" or "server" block; in
       particular, it's especially useful when a single "server" block is
       handling multiple virtual hosts.

    *) Feature: GZip HTTP compression module compatibility with the zlib-ng
       versions 2.2.0 and above, which could previously cause "[alert] gzip
       filter failed to use preallocated memory" messages in the error log.

    *) Feature: the "max_headers" directive that limits the number of HTTP
       request header fields to better protect against DoS attacks.
       Thanks to Maxim Dounin (freenginx) and Maksim Yevmenkin.

    *) Feature: the "http3_max_table_capacity" and
       "proxy_http3_max_table_capacity" directives to configure the HTTP/3
       dynamic header compression table limits.

    *) Feature: cross-compilation support - the build system can now use a
       wrapper script to run autotests, which enables to prepare a build
       without running test programs directly on the target platform.

    *) Feature: all functionality of nginx 1.27.3.

    *) Bugfix: HTTP/3 clients could time out when using 0-RTT; the fix was
       ported from nginx 1.27.4.

    *) Bugfix: proxying with HTTP/3 using variables in the "proxy_pass"
       directive and without specifying an "upstream" block could crash the
       worker process.

    *) Bugfix: HTTP/3 upstreams using dynamic table could lead to worker
       process crash if used with cache.

    *) Bugfix: some SSL handshakes could be not counted in statistics for
       the "stream" module.

    *) Bugfix: HTTP/3 proxy settings specified in "http" or "server" level
       might be ignored.

    *) Bugfix: the "proxy_client_certificate" directive didn't work when
       proxying via HTTP/3 with NTLS support enabled.


Changes with Angie 1.7.0                                         19 Sep 2024

    *) Change: updated descriptions of HTTP status codes in conformance with
       RFC 9110.
       Thanks to Maxim Dounin (freenginx) and Michiel W. Beijen.

    *) Change: a maximum of one empty line is now allowed before an HTTP
       request to better protect against DoS attacks.
       Thanks to Maxim Dounin (freenginx).

    *) Change: HTTP/1.x header field names without a colon at the end are
       now prohibited; such invalid header fields from a client or a proxied
       server will now cause an error response.
       Thanks to Maxim Dounin (freenginx) and Maksim Yevmenkin.

    *) Change: when reading a request body using HTTP/1.1 chunked transfer
       encoding, the total size of ignored chunk extensions and trailer
       header fields is now limited by the "client_max_body_size" directive
       to better protect against DoS attacks.
       Thanks to Maxim Dounin (freenginx) and Bartek Nowotarski.

    *) Change: the MIME type in the "mime.types" configuration file has been
       changed to "image/bmp" for the "bmp" extension and
       "application/vnd.rar" for the "rar" extension; set to
       "application/vnd.debian.binary-package" for the "deb" and "udeb"
       extensions.
       Thanks to Yuriy Izorkin.

    *) Feature: forced closing all the connections to a proxied server when
       it's removed from the group can be configured via the
       "proxy_connection_drop", "grpc_connection_drop",
       "fastcgi_connection_drop", "scgi_connection_drop", and
       "uwsgi_connection_drop" directives.

    *) Feature: counters of sent DNS query types in the resolver statistics
       API, which is collected with the "status_zone" parameter of the
       "resolver" directive.

    *) Feature: the "$ssl_server_cert_type" variable that contains the type
       of selected certificate for a received TLS-connection.

    *) Feature: disabling creation of the PID file with the "off" parameter
       of the "pid" directive, which might be beneficial with immutable
       images and direct control by a service manager.
       Thanks to Maxim Dounin (freenginx).

    *) Feature: creation of the PID file made atomic via an intermediate
       temporary file, which removes a moment when the file is already in
       the directory but still empty, and allows external programs to handle
       it more easily and reliably.

    *) Feature: now, during reconfiguration, no attempt is made to recreate
       the PID file if the name in the "pid" directive has changed but
       points to the same file via symlinks; in particular, it allows
       avoiding issues on systems that migrate from "/var/run/angie.pid" to
       "/run/angie.pid".
       Thanks to Maxim Dounin (freenginx).

    *) Feature: syslog logging errors are now reported no more than once per
       second; this helps avoid flooding the logs with such messages when
       the syslog server is down or overloaded.
       Thanks to Maxim Dounin (freenginx).

    *) Feature: in the Mail proxy module, the maximum number of commands
       during authentication, configured with the "max_commands" directive,
       is limited to better protect against DoS attacks.
       Thanks to Maxim Dounin (freenginx).

    *) Feature: the "--feature-cache" option of the ./configure script to
       cache its results for optimization when building multiple modules or
       cross-compiling.

    *) Feature: all functionality of nginx 1.27.1.

    *) Bugfix: "PID file ... not readable (yet?) after start" and "Failed to
       parse PID from file..." errors might appear when starting with
       systemd.
       Thanks to Maxim Dounin (freenginx).


Changes with Angie 1.6.2                                         16 Aug 2024

    *) Security: processing a specially crafted mp4 file with the
       ngx_http_mp4_module could cause a worker process crash
       (CVE-2024-7347); the fix was ported from nginx 1.27.1.


Changes with Angie 1.6.1                                         08 Aug 2024

    *) Feature: a new "passed" counter in the API statistics of the "stream"
       module's "status_zone" directive tracks connections passed to other
       sockets using "pass" directives.

    *) Bugfix: when using virtual servers or the "pass" directives in the
       "stream" module, connections could be accounted incorrectly in the
       statistics API.

    *) Bugfix: worker processes could crash on configurations with 5 ACME
       clients or more; the bug had appeared in 1.6.0.

    *) Bugfix: handling cached responses with the "X-Accel-Redirect" header
       could crash the worker process.
       Thanks to Maxim Dounin (freenginx) and Jiří Setnička.


Changes with Angie 1.6.0                                         28 Jun 2024

    *) Feature: the "sticky" directive and related options in the "stream"
       module's "upstream" block, which allow to configure sticky sessions
       mode where all connections in the session are routed to the same
       server.

    *) Feature: extraction of Cookie values from RDP connections using the
       "rdp_preread" directive in the "stream" module into "$rdp_cookie" and
       "$rdp_cookie_NAME" variables, which allows to log and stick RDP
       client sessions to particular servers while load balancing.

    *) Feature: support for multiple "acme" directives in a "server" block,
       which allows to configure obtaining two types of certificates at once
       for that virtual server.

    *) Feature: command line options "-m" and "-M" to list built-in and
       loaded modules.

    *) Feature: support for BoringSSL in the ACME module.

    *) Feature: all functionality of nginx 1.27.0, including support for
       virtual servers in the "stream" module and the "pass" directive,
       which allows to pass accepted connections for handling to another
       listening sockets, including HTTP and Mail modules.

    *) Bugfix: certificate request via the ACME protocol could result in
       error on some configurations with a log message like "[alert]
       getsockname() failed (9: Bad file descriptor)".

    *) Bugfix: certificate request with large number of domain names via the
       ACME protocol could result in error with a log message like "[error]
       JSON parser error".

    *) Bugfix: ACME clients in configurations with multiple "error_log"
       directives could log messages to irrelevant logs.


Changes with Angie 1.5.2                                         31 May 2024

    *) Security: when using HTTP/3, processing of a specially crafted QUIC
       session could cause a worker process crash, worker process memory
       disclosure on systems with MTU larger than 4096 bytes, or have other
       impact (CVE-2024-32760, CVE-2024-31079, CVE-2024-35200,
       CVE-2024-34161); the fix has been ported from nginx 1.26.1.


Changes with Angie 1.5.1                                         16 May 2024

    *) Change: now ACME clients do not discard previously stored
       certificates that were expired or issued for a different domain list,
       but use them while renewing.

    *) Bugfix: the "proxy_next_upstream" mechanism did not work correctly
       when using the "resolve" option of the "server" directive in the
       "upstream" block if the number of resolved IP addresses differed from
       the number of specified servers.

    *) Bugfix: while requesting a certificate via the ACME protocol, a
       segmentation fault could occur in a worker process.

    *) Bugfix: the "slow_start" mechanism did not work when proxying TCP
       connections in the "stream" module.

    *) Bugfix: HTTP/3 requests could result in an error if received as TLS
       1.3 early data; the bug had appeared in 1.4.0.

    *) Bugfix: HTTP/3 connection could be prematurely closed while using
       0-RTT in QUIC.

    *) Bugfix: when reading a request body from a fast connection, reading
       for a long time was possible.
       Thanks to Maxim Dounin (freenginx).


Changes with Angie 1.5.0                                         27 Mar 2024

    *) Feature: basic support for automatically obtaining and updating
       certificates using the ACME protocol, configurable with the
       "acme_client" and "acme" directives, as well as variables of the form
       "$acme_cert_*" and "$acme_cert_key_*".

    *) Feature: configuration of automatic redirection, which adds trailing
       slashes to request URIs, with the "auto_redirect" directive.

    *) Feature: output statistics metrics with dates in Epoch format instead
       of ISO 8601 for use in Prometheus and optionally in the JSON API with
       the "?date=epoch" request argument.

    *) Feature: new "recovering" state for upstream peers in the statistics
       API, indicating that a peer is slowly starting up after a failure, as
       suggested by the "slow_start" option.

    *) Feature: now the "-V" switch also shows the relevant version of
       nginx, which is useful for compatibility with third-party utilities,
       certbot in particular.
       Thanks to AdvTechnoKing.

    *) Feature: all functionality of nginx 1.25.4.

    *) Bugfix: if the SSL session reuse mechanism "proxy_ssl_session_reuse"
       was used and the list of proxied servers was dynamically updated, a
       leak could occur in the shared memory zone configured for the
       corresponding "upstream" block.


Changes with Angie 1.4.1                                         15 Feb 2024

    *) Security: when using HTTP/3, a segmentation error may have occured in
       a worker process while processing a specially crafted QUIC session
       (CVE-2024-24989); note that Angie as of 1.4.0 is already not
       vulnerable to CVE-2024-24990.


Changes with Angie 1.4.0                                         12 Dec 2023

    *) Feature: support for establishing HTTP/3 connections to upstream
       servers in the HTTP proxy module while allowing clients to use
       arbitrary HTTP versions. Configuration is done with the
       "proxy_http_version" directive and a set of "proxy_quic_" and
       "proxy_http3_" directives.

    *) Feature: a mechanism for smoothly bringing the proxied server online
       after a failure using the "slow_start" option of the "server"
       directive in the "upstream" block.

    *) Feature: "mqtt_preread" directive in the "stream" module, which
       allows extracting the username and client id from the CONNECT packet
       of the MQTT protocol into the $mqtt_preread_username and
       $mqtt_preread_clientid variables.

    *) Feature: limiting the response rate of MP4 files transmission to the
       client proportionally to the bitrate using the "mp4_limit_rate" and
       "mp4_limit_rate_after" directives, which reduces the bandwidth load.

    *) Feature: all functionality of nginx 1.25.3.

    *) Bugfix: if a proxied server was the only one in a group, it could be
       incorrectly reported as "unavailable" in the statistics API even
       after recovery.


Changes with Angie 1.3.2                                         23 Nov 2023

    *) Bugfix: possible incorrect values of metrics in Prometheus output
       that used variables other than $p8s_value for their values; in
       practice the issue could occur with
       "angie_http_upstreams_peers_state" and
       "angie_stream_upstreams_peers_state" from the standard
       "prometheus_all.conf" template.

    *) Bugfix: some connection attempts to upstream servers might not have
       been properly accounted for in the statistics API if they failed
       immediately; the bug had appeared in 1.3.0.


Changes with Angie 1.3.1                                         18 Oct 2023

    *) Security: added extra limitations to HTTP/2 stream handling for
       better protection against the DoS attack known as "HTTP/2 Rapid
       Reset" (CVE-2023-44487).


Changes with Angie 1.3.0                                         19 Sep 2023

    *) Feature: ability to specify multiple match patterns in the "location"
       directive, which allows to combine several "location" blocks with
       similar settings and therefore simplify configuration by reducing
       duplication.

    *) Feature: export of varied statistics metrics in Prometheus format
       with flexible template configuration using the new "prometheus" and
       "prometheus_template" directives.

    *) Feature: detailed information and metrics for groups of stream
       upstream servers in the statistics interface provided by the "api"
       directive.

    *) Feature: the "resolve" option of the "server" directive in the
       "stream" module’s "upstream" block that allows to monitor changes to
       the list of IP addresses corresponding to a domain name, and
       automatically update it without the need of reloading configuration.

    *) Feature: the "service" option of the "server" directive in the
       "stream" module’s "upstream" block that allows to retrieve lists of
       addresses from DNS SRV records, with basic priority support.

    *) Feature: access to the contents of configuration files used by the
       current generation of worker processes via the interface provided by
       the "api" directive with the "api_config_files" directive enabled.

    *) Feature: display of the configuration generation number in process
       titles, which allows to monitor the success of configuration reloads
       and the number of previous worker process generations using the "ps"
       utility.

    *) Feature: all functionality of nginx 1.25.2.

    *) Bugfix: compilation failed when ./configure options
       "--without-http_upstream_zone_module" or
       "--without-stream_upstream_zone_module" were used; the bug had
       appeared in 1.2.0.

    *) Change: now appname "angie" is used when loading the OpenSSL
       configuration.


Changes with Angie 1.2.0                                         30 May 2023

    *) Feature: the "sticky" directive and related options in the HTTP
       module "upstream" block, that allow to configure sticky sessions
       mode, where all requests of the session are routed to the same
       server.

    *) Feature: the $upstream_sticky_status variable, that takes either
       "NEW", "HIT" or "MISS" values depending on success of requesting
       related upstream server with sticky sessions enabled.

    *) Feature: support for NTLS in the HTTP and stream modules using
       TongSuo TLS library, that can be enabled via the "--with-ntls" build
       time option and configured with the "ssl_ntls" and "proxy_ssl_ntls"
       corresponding directives.

    *) Feature: in the HTTP and stream proxy-modules ability to specify
       multiple certificates with different types (RSA and ECDSA) and
       corresponding keys, using the "proxy_ssl_certificate" and
       "proxy_ssl_certificate_key" directives.

    *) Feature: display of version and build name in the "master" process
       title, which allows to get this information about a running server
       instance using the "ps" utility.

    *) Feature: ability to compress "207 Multi-Status" responses by the gzip
       module.
       Thanks to DBotThePony.

    *) Feature: all functionality of nginx 1.25.0, including HTTP/3 support.


Changes with Angie 1.1.0                                         24 Jan 2023

    *) Feature: the "resolve" option of the "server" directive in the HTTP
       module "upstream" block, that allows to monitor changes to the list
       of IP addresses corresponding to a domain name, and automatically
       update it without the need of reloading configuration.

    *) Feature: the "service" option of the "server" directive in the HTTP
       module "upstream" block, that allows to retrieve lists of addresses
       from DNS SRV records, with basic priority support.

    *) Feature: detailed information and metrics for the groups of HTTP
       upstream servers in the statistics interface provided by the "api"
       directive.

    *) Feature: autoindex uses natural sorting order for directory listings.

    *) Feature: all functionality of nginx 1.23.3.

    *) Bugfix: compilation failed due to false warning when using GCC 9 or
       older with the -O2 or higher optimization.


Changes with Angie 1.0.0                                         27 Oct 2022

    *) Feature: the "api" directive, that provides HTTP RESTful interface
       for accessing in JSON format basic information about a web server
       instance, as well as metrics of client connections, shared memory
       zones, DNS queries, HTTP requests, HTTP responses cache, TCP/UDP
       sessions of "stream" module, and zones of "limit_conn/limit_req"
       modules.

    *) Feature: the "status_zone" directive in "http" module for specifying
       zone to collect request metrics in "server" and "location" contexts.

    *) Feature: the "status_zone" directive in "stream" module for
       specifying zone to collect TCP/UDP session metrics.

    *) Feature: the "status_zone" parameter of the "resolver" directive for
       specifying zone to collect metrics on DNS queries.

    *) Feature: the $angie_version variable with version of Angie.

    *) Feature: all functionality of nginx 1.23.2.

