# Surface Texture Covariates

#### Bill Peterman

# 1 What surface texture covariates measure

A kernel covariate in `multiScaleR` summarizes the average value of a continuous raster in the neighborhood of a point. A surface texture covariate summarizes something different: how variable that surface is within the neighborhood. Two points can have the same average elevation, NDVI, or canopy height, yet one can sit in smooth terrain and the other in rugged terrain. Surface texture metrics capture that difference.

`surface_var()` derives these metrics from a continuous raster within a circular buffer, in the same way that `landscape_var()` derives landscape metrics from a categorical raster. The two functions are deliberately separate because they expect opposite kinds of raster: `landscape_var()` requires integer class codes, while `surface_var()` requires continuous values. If you have not used the explicit covariate interface before, read `vignette("landscape_metric_covariates", package = "multiScaleR")` first; this vignette assumes you are comfortable with `msr_vars()`.

This release supports six surface texture metrics, all borrowed from the surface-metrology literature. Two describe dispersion (how spread out the values are), two describe the shape of the value distribution, and two describe the geometry of local change (slope and surface area). Most are matched to the `geodiv` package so that `geodiv` can be used to validate results; the exceptions are noted below.

## 1.1 Surface metric reference

Each metric is computed on the continuous values within a circular buffer centered on a sample point (or on each raster cell when projecting with `kernel_scale.raster()`). In the formulas below, \(z_i\) is a cell value in the neighborhood, \(\bar z\) is the mean of those values, \(s\) is their standard deviation, and \(n\) is the number of finite cells.

Code | Name | Definition | Reading
--- | --- | --- | ---
`sa` | Average roughness | \(S_a = \frac{1}{n}\sum_i \lvert z_i - \bar z \rvert\) | Mean absolute deviation from the neighborhood mean. Robust to a few extreme cells.
`sq` | RMS roughness | \(S_q = \sqrt{\frac{1}{n-1}\sum_i (z_i - \bar z)^2}\) | The sample standard deviation of the neighborhood. More sensitive to large deviations than `sa`.
`ssk` | Skewness | \(S_{sk} \propto \frac{1}{n\,s^3}\sum_i (z_i - \bar z)^3\) | Asymmetry of the value distribution. Positive when occasional high values dominate, negative when occasional low values do.
`sku` | Kurtosis | \(S_{ku} = \frac{1}{n\,s^4}\sum_i (z_i - \bar z)^4 - 3\) | Peakedness and tail weight relative to a normal distribution (excess kurtosis, so a normal surface gives 0).
`sdq` | RMS slope | \(S_{dq} = \sqrt{\frac{1}{n}\sum_i \lvert \nabla z_i \rvert^2}\) | Root mean square of the local gradient magnitude: how steeply the surface changes (terrain or structural ruggedness).
`sdr` | Surface area ratio | \(S_{dr} = \left(\frac{A_{3D}}{A_{flat}} - 1\right) \times 100\) | Percentage by which the true 3D surface area exceeds the flat area. A continuous edge-density analog: more relief gives a larger ratio.

The dispersion metrics (`sa`, `sq`) are zero on a perfectly flat surface and grow as the surface becomes more variable. They are reported in the units of the raster itself: if `land3` ranges from 0 to 1, a roughness of 0.10 means the values within the buffer deviate from their local mean by about a tenth of that range. `sa` and `sq` measure the same underlying idea (local spread) and are usually correlated; `sq` weights large deviations more heavily because it squares them, so it responds more strongly to a few unusual cells.

The shape metrics (`ssk`, `sku`) are dimensionless and describe the form of the value distribution rather than its spread, so they complement the dispersion metrics. The geometry metrics (`sdq`, `sdr`) describe local change. `sdq` measures gradient steepness; it is reported as a true slope (rise over run), dividing the local elevation change by the cell resolution. The matched `geodiv` function `geodiv::sdq()` instead uses a cell spacing of one, so the two agree after multiplying by the resolution. `sdr` is the percentage by which the true 3D surface area exceeds the flat projected area, computed in physical units (real elevation values and the real cell size), so a tilted plane of slope \(s\) gives exactly \((\sqrt{1 + s^2} - 1)\times 100\). It behaves as a continuous edge-density analog: terrain that folds and rises has more surface area per unit ground. Note that `geodiv::sdr()` rescales the surface to a unit range and is therefore dimensionless; the physical definition used here is the interpretable one for terrain and, unlike the rescaled version, can be projected by FFT. A few cautions are worth keeping in mind: the shape metrics are noisier than dispersion and need a reasonable number of cells in the buffer to be stable, and `ssk`, `sdq`, and `sdr` can be correlated with `sq` on many surfaces, so check their correlations before interpreting them together.

## 1.2 A note on scale

A surface texture covariate behaves differently from a kernel-weighted mean as you change the radius. A larger radius does not simply smooth the same quantity over a wider area; it changes what is being measured. A small radius asks how rough the surface is in the immediate vicinity of a point (fine-grain texture). A large radius asks how variable the surface is across a broader extent, which folds in any large-scale gradient or patchiness. Keep this in mind when interpreting an optimized radius: the estimated scale is the neighborhood size at which within-neighborhood variability best explains the response, not the scale of an averaging window.

# 2 Load example data

This example reuses the simulated count data, survey locations, and landscape raster included with `multiScaleR`. The data contain 100 spatial sample points, which is enough to demonstrate the workflow without making the vignette expensive to build.

    data("landscape_counts")
    dat <- landscape_counts

    data("surv_pts")
    pts <- vect(surv_pts)

    land_rast <- rast(pkg_extdata("landscape.tif"))

The raster stack contains two continuous layers suited to surface texture metrics. `land3` is a smooth, highly autocorrelated surface (think elevation or canopy height), so its roughness varies meaningfully from place to place. `land2` is a noisier, weakly autocorrelated surface. We also keep `land2` because the example counts were simulated to respond to its kernel-weighted mean, which gives us a covariate with a genuine, interpretable scale of effect.

    surfaces <- c(land_rast$land2, land_rast$land3)
    plot(surfaces)
    plot(land_rast$land3, main = "land3 with survey points")
    points(pts, pch = 19, cex = 0.6, col = "red")

How to read these plots: Where `land3` transitions sharply between low and high values, a buffer placed on the transition contains a wide spread of values and will have high roughness. Where `land3` is locally flat (a broad light or dark patch), a buffer contains similar values and roughness is low. The roughness surfaces produced later in this vignette make that pattern explicit.

# 3 Define derived covariates

Use `msr_vars()` to name the model covariates. Here `land2_mean` is an optimized, kernel-weighted mean, while `land3_sq_500` and `land3_sa_500` are fixed-radius surface texture metrics computed within 500 m of each point. Computing the surface metrics at a fixed radius keeps this example fast: they are calculated once and are not re-evaluated during optimization.

    scale_vars <- msr_vars(
      land2_mean   = kernel_var("land2"),
      land3_sq_500 = surface_var("land3", metric = "sq", radius = 500),
      land3_sa_500 = surface_var("land3", metric = "sa", radius = 500)
    )

    scale_vars

The distinction is the same as for landscape metrics:

- `land2` and `land3` are source raster layers.
- `land2_mean`, `land3_sq_500`, and `land3_sa_500` are model covariates.
- Only `land2_mean` receives an optimized sigma in this example.

# 4 Prepare model data and fit

Pass the specification to `kernel_prep()`. The returned `kernel_dat` data frame holds the derived covariates, already centered and scaled to unit variance.

    kernel_inputs <- kernel_prep(
      pts = pts,
      raster_stack = land_rast,
      max_D = 1500,
      kernel = "gaussian",
      scale_vars = scale_vars,
      verbose = FALSE
    )

    head(kernel_inputs$kernel_dat)

Combine the covariates with the response and fit the starting model.

    df <- data.frame(dat, kernel_inputs$kernel_dat)

    mod <- glm(
      counts ~ site + land2_mean + land3_sq_500 + land3_sa_500,
      family = poisson(),
      data = df
    )

# 5 Optimize and interpret

Only `land2_mean` was left free, so optimization estimates a single scale parameter while the two surface metrics stay fixed at 500 m. This keeps the example fast and mirrors a common analysis pattern: optimize the covariate whose scale is the scientific question, and hold the others at a biologically motivated buffer.

    opt <- multiScale_optim(
      fitted_mod = mod,
      kernel_inputs = kernel_inputs,
      verbose = FALSE
    )

    opt <- vignette_cache$surface$opt
    summary(opt)
    #>
    #> Call:
    #> multiScale_optim(fitted_mod = surface_mod, kernel_inputs = surface_inputs,
    #>     verbose = FALSE)
    #>
    #>
    #> Kernel used:
    #>
    #>
    #> ***** Optimized Scale of Effect -- Sigma *****
    #>
    #>                Mean       SE     2.5%    97.5%
    #> land2_mean 417.5643 35.16722 347.7486 487.3801
    #>
    #>
    #>   ====================================
    #>
    #> ***** Optimized Scale of Effect -- Distance *****
    #> 90% Kernel Weight
    #>
    #>              Mean 2.5%  97.5%
    #> land2_mean 686.83  572 801.67
    #>
    #>
    #>   ====================================
    #>
    #>  *****     Fitted Model Summary     *****
    #>
    #>
    #> Call:
    #> glm(formula = counts ~ site + land2_mean + land3_sq_500 + land3_sa_500,
    #>     family = poisson(), data = data)
    #>
    #> Coefficients:
    #>              Estimate Std. Error z value Pr(>|z|)
    #> (Intercept)   0.46270    0.08676   5.333 9.64e-08 ***
    #> site          0.07375    0.07911   0.932    0.351
    #> land2_mean    0.68555    0.07751   8.845  < 2e-16 ***
    #> land3_sq_500 -0.77677    1.07138  -0.725    0.468
    #> land3_sa_500  0.98629    1.06937   0.922    0.356
    #> ---
    #> Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
    #>
    #> (Dispersion parameter for poisson family taken to be 1)
    #>
    #>     Null deviance: 224.24  on 99  degrees of freedom
    #> Residual deviance: 137.90  on 95  degrees of freedom
    #> AIC: 344.58
    #>
    #> Number of Fisher Scoring iterations: 5
    #>
    #>
    #>
    #> ***** Follow-up recommendation *****
    #> Recommended `max_D`: 1500
    #> Recommended starting `sigma` values:
    #> land2_mean
    #>   417.5643
    #>
    #> Action:
    #> Use the optimized parameters as efficient starting values if refitting.

How to read the `summary()` output: The scale section reports the estimated sigma for `land2_mean`, with its standard error and 95% confidence interval, in map units (meters here). Below it is the effective distance, the radius that captures a stated proportion (default 90%) of the Gaussian kernel weight. That converts sigma into a distance you can interpret on the ground. The two fixed-radius surface metrics do not appear in the scale section because their radius was specified rather than estimated; they enter the model only as ordinary covariates.

The model coefficients are on the Poisson log (link) scale, so they must be back-transformed to be interpretable. Because every covariate was centered and scaled, each coefficient describes the effect of a one standard deviation change in that covariate. Exponentiating gives the multiplicative change in expected count.

    cf <- coef(summary(opt$opt_mod))
    ## Multiplicative change in expected count per 1 SD increase in each covariate
    round(exp(cf[, "Estimate"]), 3)
    #>  (Intercept)         site   land2_mean land3_sq_500 land3_sa_500
    #>        1.588        1.077        1.985        0.460        2.681

For example, an `exp()` value of 1.20 for a surface metric would mean that a one standard deviation increase in roughness is associated with a 20 percent higher expected count, holding the other covariates constant. Note an important caveat: these example counts were simulated to respond to kernel-weighted means of `land1` and `land2`, not to surface roughness. The recovered scale for `land2_mean` is therefore the meaningful quantity to interpret here, and the roughness coefficients are best read as a demonstration of the mechanics. In your own analysis, a surface texture coefficient is interpreted exactly like any other scaled predictor.

# 6 Project covariates to rasters

`kernel_scale.raster()` understands `surface_var()` specifications just as it does kernel and landscape covariates. When a fitted `multiScaleR` object is supplied, the optimized covariate uses its fitted scale and the fixed-radius surface metrics use their specified radius. Setting `scale_center = TRUE` returns the projected covariates on the same centered and scaled footing as the model, ready for `terra::predict()`.

    projected <- terra::unwrap(vignette_cache$surface$projected)

    plot(projected)

Projected model covariates at their fitted or fixed scales.

    names(projected)
    #> [1] "land2_mean"   "land3_sq_500" "land3_sa_500" "site"

How to read these plots: `land2_mean` is a smoothed average surface, so it looks like a blurred version of the source layer. The roughness layers (`land3_sq_500`, `land3_sa_500`) look different: they are bright where `land3` changes rapidly within 500 m and dark where it is locally uniform. Roughness maps highlight transitions and texture, not high or low values. The stack also includes a constant `site` layer filled with zeros: because `site` is a field-measured covariate with no raster source, `kernel_scale.raster()` appends a placeholder so the output can be passed directly to `terra::predict()`. Replace it with a real surface if you want to predict at a non-reference value of `site`.

# 7 Roughness surfaces without a fitted model

You do not need a fitted model to produce a roughness surface. Pass a `scale_vars` object in which every covariate has a fixed `radius`, and `kernel_scale.raster()` returns the metric surfaces directly. This is useful for exploring how texture varies across a landscape, or for comparing scales before committing to a model.

    sq_multi <- kernel_scale.raster(
      raster_stack = land_rast["land3"],
      scale_vars = msr_vars(
        sq_200 = surface_var("land3", metric = "sq", radius = 200),
        sq_500 = surface_var("land3", metric = "sq", radius = 500),
        sq_900 = surface_var("land3", metric = "sq", radius = 900)
      ),
      verbose = FALSE
    )

    plot(sq_multi, main = c("sq - 200 m", "sq - 500 m", "sq - 900 m"))

How to read these plots: At 200 m the surface picks out fine, local texture, so roughness is patchy and concentrated near sharp transitions. At 900 m each buffer spans more of the underlying gradient, so roughness is smoother and generally higher. This is the practical face of the scale caution from the introduction: the radius changes the quantity, not just its resolution.

The `sa` and `sq` metrics emphasize roughness slightly differently. Comparing them at a single radius shows where a few extreme cells (which `sq` weights more heavily) drive the signal.

    sa_sq <- kernel_scale.raster(
      raster_stack = land_rast["land3"],
      scale_vars = msr_vars(
        sa_500 = surface_var("land3", metric = "sa", radius = 500),
        sq_500 = surface_var("land3", metric = "sq", radius = 500)
      ),
      verbose = FALSE
    )

    plot(sa_sq, main = c("sa - 500 m", "sq - 500 m"))

Projection of `sq` uses fast Fourier transform convolution, and projection of `sa` uses a compiled focal pass. Both reproduce the per-point calculation exactly; `sq` is the faster of the two on very large rasters.

## 7.1 Distribution-shape and geometry surfaces

The same standalone projection works for the shape metrics (`ssk`, `sku`) and the geometry metrics (`sdq`, `sdr`). They answer different questions than dispersion: skewness and kurtosis describe the form of the value distribution in the neighborhood, `sdq` describes how steeply the surface changes, and `sdr` describes how much extra surface area that change creates.

    shape_geom <- kernel_scale.raster(
      raster_stack = land_rast["land3"],
      scale_vars = msr_vars(
        ssk_500 = surface_var("land3", metric = "ssk", radius = 500),
        sku_500 = surface_var("land3", metric = "sku", radius = 500),
        sdq_500 = surface_var("land3", metric = "sdq", radius = 500),
        sdr_500 = surface_var("land3", metric = "sdr", radius = 500)
      ),
      verbose = FALSE
    )

    plot(shape_geom,
         main = c("ssk - 500 m", "sku - 500 m", "sdq - 500 m", "sdr - 500 m"))

How to read these plots: The skewness surface is positive where the neighborhood is dominated by occasional high values and negative where low values dominate. The kurtosis surface is high where a few extreme cells stretch the tails of the local distribution. The `sdq` and `sdr` surfaces are both bright where `land3` changes steeply from cell to cell: `sdq` as a slope and `sdr` as the extra 3D surface area that slope produces, so they resemble ruggedness maps and are often correlated. Because shape and geometry are noisier than dispersion, they are most useful when a hypothesis specifically concerns asymmetry, tail behavior, gradient steepness, or surface complexity rather than overall variability.

# 8 Optimizing the scale of roughness

To estimate the scale of a surface texture covariate rather than fix it, omit `radius` from `surface_var()`. The covariate then receives its own sigma, which `multiScale_optim()` estimates alongside the model.

    scale_vars_opt <- msr_vars(
      land2_mean = kernel_var("land2"),
      land3_sq   = surface_var("land3", metric = "sq")
    )

    kernel_inputs_opt <- kernel_prep(
      pts = pts,
      raster_stack = land_rast,
      max_D = 1500,
      scale_vars = scale_vars_opt,
      verbose = FALSE
    )

Optimizing a surface texture radius is well defined, but it costs more than optimizing a kernel-weighted mean: at each candidate radius the metric is recomputed for every sample point, since (unlike a kernel mean) it cannot be read off a precomputed distance binning. Surface metrics are continuous in the radius, so they tend to optimize smoothly. Start with fixed radii to confirm the workflow, then optimize once the model structure is settled. Optimized unweighted surface metrics are not currently supported with `kernel = "expow"`, because the exponential-power shape parameter does not apply to a hard-edged buffer. The weighted form below does use the kernel, so it is supported with every kernel.

# 9 Weighted roughness: the scale of effect of heterogeneity

The surface metrics above summarize a hard-edged circular neighborhood: every cell within the radius counts equally. Setting `weighted = TRUE` instead weights each cell by the model’s distance kernel, the same Gaussian (or exponential) kernel used for a `kernel_var()` mean, and optimizes the kernel scale (sigma) rather than a hard radius.

This changes both the question and the statistics. A weighted `sq` answers “at what spatial scale does the variability of this surface, measured with a smoothly decaying neighborhood, best predict the response?” Because the kernel weights change smoothly as sigma changes (cells do not jump in and out of a hard edge), the likelihood is smooth in sigma, so `multiScale_optim()` recovers the scale with a standard error just as it does for a kernel-weighted mean. This is the natural way to ask about the scale of effect of heterogeneity, as opposed to the scale of effect of the mean.

    weighted_vars <- msr_vars(
      land3_sq_weighted = surface_var("land3", metric = "sq", weighted = TRUE)
    )

Weighting is available for the distribution metrics (`sa`, `sq`, `ssk`, `sku`) but not the slope metric (`sdq`), and the scale is always optimized, so no `radius` is supplied. To see the difference a weighting makes, the projection below compares a hard-radius `sq` at 500 m with a Gaussian-weighted `sq` at the same nominal scale.

    sq_hard <- kernel_scale.raster(
      raster_stack = land_rast["land3"],
      scale_vars = msr_vars(sq_hard = surface_var("land3", metric = "sq",
                                                  radius = 500)),
      verbose = FALSE
    )

    sq_weighted <- kernel_scale.raster(
      raster_stack = land_rast["land3"],
      scale_vars = weighted_vars,
      sigma = 500,            # the kernel scale for the weighted metric
      kernel = "gaussian",
      verbose = FALSE
    )

    plot(c(sq_hard, sq_weighted), main = c("sq hard radius 500 m", "sq weighted sigma 500"))

How to read these plots: Both maps show local roughness at a 500 m scale, but the weighted version transitions more smoothly because nearby cells contribute more than distant ones. In a model, the practical payoff is the optimization: the weighted form gives `multiScale_optim()` a smooth objective in sigma and returns the scale of heterogeneity with a confidence interval. Use the weighted form when the scale of heterogeneity is the scientific question; the hard-radius form remains convenient when you have a biologically motivated buffer or want a metric that matches the `geodiv` definitions exactly.

# 10 Practical guidance

- Use a surface texture covariate when you expect the variability of a continuous surface, rather than its average, to matter ecologically: terrain ruggedness, vegetation-structure heterogeneity, thermal patchiness, and similar.
- Choose `sq` when large local deviations are ecologically important, and `sa` when you want a measure that is less sensitive to a few extreme cells.
- A surface metric and a kernel-weighted mean from the same source layer answer different questions and can both be included; check their correlation before interpreting either in isolation.
- Use a fixed radius when you have a biologically motivated buffer or want a fast model; optimize the radius when the scale of heterogeneity is itself the question.
- Use `weighted = TRUE` (for `sa`, `sq`, `ssk`, `sku`) when you want the scale of heterogeneity estimated with a smooth likelihood under the model’s kernel; keep the default hard-radius form when you want a fixed buffer or exact agreement with `geodiv`.

# 11 Quick reference

    ## 1. Define covariates: an optimized kernel mean plus fixed-radius roughness
    scale_vars <- msr_vars(
      land2_mean   = kernel_var("land2"),
      land3_sq_500 = surface_var("land3", metric = "sq", radius = 500),
      land3_sa_500 = surface_var("land3", metric = "sa", radius = 500)
    )

    ## 2. Extract and prepare the covariates around each point
    kernel_inputs <- kernel_prep(pts, land_rast, max_D = 1500,
                                 scale_vars = scale_vars, verbose = FALSE)

    ## 3. Fit the starting model
    df  <- data.frame(dat, kernel_inputs$kernel_dat)
    mod <- glm(counts ~ site + land2_mean + land3_sq_500 + land3_sa_500,
               family = poisson(), data = df)

    ## 4. Optimize the free scale parameter(s)
    opt <- multiScale_optim(fitted_mod = mod, kernel_inputs = kernel_inputs)
    summary(opt)                              # sigma + effective distance, on map units

    ## 5. Project covariates for prediction (centered and scaled like the model)
    projected <- kernel_scale.raster(land_rast, multiScaleR = opt,
                                     scale_center = TRUE, clamp = TRUE)

    ## Standalone roughness surface, no model required
    sq_500 <- kernel_scale.raster(
      land_rast["land3"],
      scale_vars = msr_vars(sq_500 = surface_var("land3", metric = "sq", radius = 500))
    )

## 11.1 Summary of key functions

Function | Purpose
--- | ---
`surface_var()` | Define a continuous surface texture covariate (`sa` or `sq`).
`msr_vars()` | Collect covariate specifications into one object.
`kernel_prep()` | Extract and prepare covariates around each point.
`multiScale_optim()` | Estimate the scale of effect for optimized covariates.
`kernel_scale.raster()` | Project covariates to rasters, with or without a fitted model.

## 11.2 See also

- `vignette("landscape_metric_covariates", package = "multiScaleR")` for categorical landscape metrics and the `msr_vars()` interface.
- `vignette("multiScaleR_Guide", package = "multiScaleR")` for the full modeling workflow and model interpretation.
- `vignette("spatial_projection_clamping", package = "multiScaleR")` for projecting fitted models to prediction surfaces.